what kind of extension cords are you guys using
A nice extension cord is really nice and often overlooked
im using a shorter version of this rigid one and want to upgrade to a thicker gauge, better for your tools
any suggestions?
what kind of extension cords are you guys using
A nice extension cord is really nice and often overlooked
im using a shorter version of this rigid one and want to upgrade to a thicker gauge, better for your tools
any suggestions?
"Life is not measured by the breathes we take, but by the moments that take our breathes away" :punk:
I have a 12/3 50` yellow jacket. Nice cord for sure.
Bryan Burnworth - Atlanta Car Detailing - Peachstate Detail LLC
Selected as one of the top nine detailers in the US by Autoweek
Published in the 356 Registry
The only exclusive Opti-Coat Pro specialist in Atlanta
All PPF work done by the best in Atlanta Derek Johnson of Atlanta Protective Films
Follow Peachstate Detail LLC on Facebook here.
dang that is one thick extension cord. Comes with a hefty price to but im sure since a number of you have it . . . . . it must be good.
Depending on how long of a cord you need, get either 12 or 10 gauge wire. the lower the number the more current it will carry without dropping off voltage.It pays to get a good extension cord.
04 cobra mystichrome Sold new home in AZ.
Just make sure you check the amp rating of the cord. For extended machining, you want a cord that`s rated for at least 10 amps, preferably 12-15 amps. Generally, 10-12 gauge cords will handle that with no problem, some 14 gauge cords can too. I bought a cheap 100 ft outdoor 15 amp cord years ago from Home Depot for $30.
Since a buffer is running for hours a good cord is needed, helps the motor run cooler since it`s not fighting to draw power.Originally Posted by vtec92civic
"Life is not measured by the breathes we take, but by the moments that take our breathes away" :punk:
(2) 50 foot Craftsman Professional yellow 14 gauge with lighted ends and a unique end lock thing, that makes it impossible for things to come unplugged. Did I mention the lifetime nationwide full replacement warranty? I have tried a bunch of cords and these are the best out there. I have been very impressed with them.
Will a 14 Guage Yellow jacket Rated at 13 amps work well with a Flex 3401 VRG RO even after buffing for hours?
My Flex got too hot to touch (the metal bell around the gearing for the backing plate) last week, even running with what I thought was a heavy-enough cord (ceiling-mount garage reel). Now I`m thinking a heavier cord is needed.
Originally Posted by animes2k
My Flex almost always gets hot like that, even when I`ve had it plugged directly into a wall outlet. I think it`s just the nature of the beast....
Charlie
Automotive Appearance Specialist - Serving Greater Lansing, Michigan
http://www.cchautoappearance.com/
:up thanks. I may lube the felt ring I`ve seen people talk about. Also, it just sounds pretty awful when winding down, but that may also be the nature of the beast.
Sorry for the threadjacking.
When I sold my Metabo rotary a few years back, the buyer came to me with concerns about it getting too hot, a problem I`d never had. I think we tracked it down to a lightweight extension cord. I`ve also had my power washer refuse to work with too long/too light of an extension cord. So it can make a big difference.
Ya, I think the Flex ROs just get hot normally. So like, do you guys think I`ll be fine with a 100 ft. 13amp cord @ 14 guage?
The longer you go, the heavier gauge you need. I might go 12 gauge myself.
Here`s a yellow jacket 100ft 15A 12 gauge for $65
And for a few more bucks, throw a 3-way tap on. Comes in handy.
And yet another edit. Yellow Jacket cords are made in the USA. :up The splitter is not, however.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks