Hi All,
I would like to find out is it necessary to use AIO after Menzerna Final Polish before layering Z-5?
Or Can I use Z-6 to clean off Menzerna FP then lay Z-5?
Thanks all
regards.
nobody
Hi All,
I would like to find out is it necessary to use AIO after Menzerna Final Polish before layering Z-5?
Or Can I use Z-6 to clean off Menzerna FP then lay Z-5?
Thanks all
regards.
nobody
Originally Posted by nobody
It isn`t necessary but it does receive alot of praise on this board for its cleaning ability and the base it lays down for Z-2 or 5.
If you do not use Z-AIO, you will want to do a 50/50 water/ISO wipe down or a wash to remove the polishing oils in Menzerna products.
Originally Posted by bert31
I`ve emailed Sal about putting down Zaino after FP II and he suggested either the water/alcohol wipedown or Z6. I`m sure ZAIO will work just fine. It`ll give you that extra layer of protection before Z5. :xyxthumbs
Hi All,
I intend to give a wash down with Car Shampoo . Maybe will try it out .
Thanks All
Nobody
Originally Posted by nobody
Car shampoo alone may leave residues behind that Z2/Z5 might not bond to.
Just a bit off topic .. has anyome compared k-AIO to Z1? Is it the same stuff?
PMS Adjuster
This he is a she
But how do we know that Z5 is bonding or not ? Btw I wish to skip ZAIO cos in Singapore here AIO is rather expensive. Jus to get AIO, Z5 , Z6 could cos me around 100+ SGD .......
Thanks
Nobody
Originally Posted by Jesstzn
I was thinking using ZPC follow by Z5. Cos using Menzerna polish need to use ZAIO then Z5 . Time consuming and more cost.
Using ZPC to replace Menzerna polishes , also can no need to use ZAIO .
Wat u guy think ? Any comments?
Thanks
Nobody
You can use ZPC before Z5. It`s just the ZPC is a light polish and it might not get rid of all your swirls. Remember, you can always just do the water/alcohol wipedown instead of ZAIO after the Menzerna polishes and that will wipe off the oils from the polishes.
Originally Posted by termigator
You mean either water or alcohol ? If water it will be ok, if alcohol i doubt i will use it cos later I use the wrong type of alcohol .... lol.Actually Menzerna instuction also mention after polish use damp cloth to wipe it down. so i also believe the oil can be remove with water.
Originally Posted by nobody
I`m talking about 50/50 mix of water & isopropyl alcohol. Use it in a spray bottle and use it like a quick detailing spray after the Menzerna polish. That should get rid of the oils. Just to make sure though, only use the mix after polishing, not after anything else.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks