Can you use a machine with Dura Gloss

**jaki30** · 01-14-2008, 11:10 AM

Can you use a UDM with Dura Gloss or do you have to use the cotton cloth as they recommend<

**imported_Jakerooni** · 01-14-2008, 11:30 AM

I`ve used DG with my Rotary before with phenominal results. I don`t see why you couldn`t use a D/A. Especially since a D/A isn`t really meant to be much more than a robotic hand so to speak. You should be able to use anything with a D/A that you normaly would use with your hand to buff out.

**a.k.a. Patrick** · 01-14-2008, 11:49 AM

Keep your speeds somewhat average or below. Theres no real need to speed up applying sealants....

**Junebug** · 01-14-2008, 01:06 PM

I agree, 105 with a PC is MUCH better than by hand.

**imported_weekendwarrior** · 01-14-2008, 01:12 PM

Originally Posted by JuneBug

I agree, 105 with a PC is MUCH better than by hand.

How so? Do you get correction with it when you apply by machine?

Where are you at in NC? I am in Charlotte.

**jshillin** · 01-14-2008, 01:37 PM

Originally Posted by weekendwarrior

How so? Do you get correction with it when you apply by machine?

Where are you at in NC? I am in Charlotte.

Just easier to get a thin, even coat.

**Fallz** · 01-14-2008, 02:16 PM

Originally Posted by jshillin

Just easier to get a thin, even coat.

I used a PC with a polishing pad & 501 with a finishing pad , applied 101 & 111 with a finish pad also for the same reason stated about and get good results.

**TigerMike** · 01-14-2008, 02:41 PM

Any of the DG products with cleaners and/or abrasives would benefit from machine use, primarily 101, and the DG SMR or 601. I always use 105 by hand (although machine use is perfectly fine), but I feel like applying 105 or 111 by hand would be like applying butter to toast with a rotary.

**Junebug** · 01-14-2008, 07:43 PM

How so? Do you get correction with it when you apply by machine?

I think 105 is more like a AIO than a true polish, I like applying with a PC cause it`s thick and like someone said - it`s easier to get a nice thin, even coat.

Where are you at in NC? I am in Charlotte. - Slightly north of Raleigh, though I did live in Charlotte when I was a kid, back in the early `70`s. The last time I went to Carowinds I didn`t know the place!!

**a.k.a. Patrick** · 01-14-2008, 09:31 PM

Originally Posted by weekendwarrior

How so? Do you get correction with it when you apply by machine?

Where are you at in NC? I am in Charlotte.

The product is actually supplying lubrication for the pad. Its not so much the product cutting vs. cleaning. The pad will perform any possible cutting. They have a couple polishes (true polishes) available that work very well by machine.....