sip or ssr3 which has more cut

[rt4x4]

sip or ssr3, which has more cutting power on a pc with a orange or yellow pad?

[awahl63]

SSR3 is not made for use with the PC as it the PC does not generate enough heat to really break down the abrasives in SSR 3.

[SpoiledMan]

IMO the abrasives in SSR3 are way too harsh and take too long to break down. I`d simply find something else to use but for sure would not use it by PC.

[BaseSteala112]

SpoiledMan, what would you use with the PC?

[SpoiledMan]

While Powergloss *can* leave a hazed surface with the PC it`s a bit more foolproof than SSR3. It would be my choice OR HTEC.

[kleraudio]

i have never used Powergloss, but I can vouch for HTEC, its a superb product by PC or rotary!



Jim

[BaseSteala112]

Whats the general opinions on OHC/OC/OP via PC?

[blkyukon]

SSR3 is not made for use with the PC as it the PC does not generate enough heat to really break down the abrasives in SSR 3.

I disagree, SSR3 works fine with a PC and you can achieve great results with minimal hazing. The way to keep the hazing to a minimum is not to prime the pad with a qd or water...Priming the pad will lead to heavy hazing & change the pad often...a clogged pad will also cause excessive hazing.



Here is after SSR3 and a LC yellow cutting pad:







Close up:







After PO85RD w/polishing pad:









And here is a video showing the work time using SSR3 w/Meguiar`s cutting pad:



Heavy Oxidation Removal