2 coats of BFWD or BFMS

[dd1101]

This weekend I will be doing a cleaning on my black car once again, and I ended up picking up a 7.4 oz tub of MS.

I will be doing the wet ice over fire, due to time constraint cause of cure times, should I do two coats of BFWD or MS.

My process will be rinseless wash and clay, apply TPnS with white pad, apply BFWD with a CCS pad (red, blue, or grey??). Then in the morning apply either another coat of BFWD, or MS? Then at 2pm on saturday final coat of MS.

SO what pad to use BFWD, and I will just apply MS by hand unless using the PC is better, if so what pad.

Also I like throwing the small 3oz tub of MS in my detail bag, I assume I could take out some from the big tub with a butter knife and refill the small tub?

[BIOLINK]

I`m a big fan of multiple applications of BFWD. I personally think nothing looks better. I would apply BFMS after two apps of WD.

[Old Pirate]

This weekend I will be doing a cleaning on my black car once again, and I ended up picking up a 7.4 oz tub of MS.

I will be doing the wet ice over fire, due to time constraint cause of cure times, should I do two coats of BFWD or MS.

My process will be rinseless wash and clay, apply TPnS with white pad, apply BFWD with a CCS pad (red, blue, or grey??). Then in the morning apply either another coat of BFWD, or MS? Then at 2pm on saturday final coat of MS.

SO what pad to use BFWD, and I will just apply MS by hand unless using the PC is better, if so what pad.

Also I like throwing the small 3oz tub of MS in my detail bag, I assume I could take out some from the big tub with a butter knife and refill the small tub?

Go with the Red pad when applying BFWD, then after your 2 coats ( remember to wait between coats ) then later on apply your BFMS with a Red pad. You can apply both products by hand or with your PC which help you applying it faster. Yes you can cut out a small piece of BFMS for quick wax jobs if you like but all my waxes are in my house and when I need them that`s when I take them outside. You can also use BLACKFIRE Crystal Seal or BLACKFIRE Midnight Sun Instant Detailer instead when duty calls you from the garage. I would love to see when it`s done since your in Tampa someday. Remember to post some photo`s when you can.

[rider9195]

I agree with TID10. I love using one coat of Wet Diamond and two coats of Midnight Sun.

[dd1101]

since I only have one of the grey, blue, and red.

Which one would be better for BFMS. If I use red for sealant.

[TroyScherer]

since I only have one of the grey, blue, and red.

Which one would be better for BFMS. If I use red for sealant.

If those are your options... I would use the Blue for your sealant and the Red for BFMS. I always tend work my way down to the least aggressive pad.