Any Tips

**Definitive Detailing** · 04-19-2012, 10:03 AM

My BlackFire order will arrive Friday. I`m going to wash, clay, BF Gloss Enhancing Polish & 2 applications of BF All Finish Paint Protection.
I will be working by hand so It`s going to take a while applying the Polish. After polishing can I just move on to using the sealant or is ther a waiting period. I know there`s a cure time between sealant coats.
First time using BlackFire Products so any tips are appreciated.

**TroyScherer** · 04-19-2012, 10:44 AM

Rick, There is no cure time for the Gloss Enhancing Polish that I am aware of. Apply it and buff it off. Once you have do the entire vehicle apply your fist coat of BF All Finish Paint Protection. Wait 12 or so hours and do your second coat. Easy a pie...

**Old Pirate** · 04-19-2012, 05:04 PM

Take you time by hand ( don`t over do yourself ) and just work one panel at a time. Wash, Clay, Polish then Seal.

**Todd@RUPES** · 04-22-2012, 09:25 AM

Originally Posted by Definitive Detailing

My BlackFire order will arrive Friday. I`m going to wash, clay, BF Gloss Enhancing Polish & 2 applications of BF All Finish Paint Protection.
I will be working by hand so It`s going to take a while applying the Polish. After polishing can I just move on to using the sealant or is ther a waiting period. I know there`s a cure time between sealant coats.
First time using BlackFire Products so any tips are appreciated.

You can apply Wet Diamond immediately after removing the GEP.