BLACKFIRE All N One All Purpose Cleaner- BRAND NEW PRODUCT!!!

[Todd@RUPES]

BLACKFIRE All N One All Purpose Cleaner



BLACKFIRE`s newest multi-surface All Purpose Cleaner could have just as easily been named an Everything N One. Our chemists worked with several experts in different textile industries to develop this amazingly versatile cleaner. Simply dilute to the needed strength and clean.

Instructions

Full Strength: Bugs & Tar, Engines, Tires, Tree Sap, Wax Removal from trim, Wheels, Wheel Wells
Diluted 4 parts water with 1 part APC: Carpet & Upholstery, Leather, Textured Plastic, Vinyl
Alternative uses: Carpet & Upholstery Shampoo, Microfiber Pre-Soak, Paint Stripping Agent


Full Strength Instructions

Bug Remains

Rinse area first to remove loose dirt and soiling. Note: BLACKFIRE All N One is recommended for use a 1:4 dilution on painted surfaces. When removing embedded bug remains or stubborn tar, always attempt to use a diluted solution first. When using undiluted, only apply to a wet surface and test an inconspicuous spot first.






If Bug remains are fresh simply mist BLACKFIRE All N One All Purpose Cleaner on to the bug soiled areas and all to dwell for 30 seconds to 1 minute. Wash normally and rinse clean with water. If you are washing the entire vehicle do this area last to avoid scratching the rest of the vehicle with the removed bug particulate. If the Bug remains have had a chance to harden or are have been on the paint for a long time, spray BLACKFIRE All N All Purpose Cleaner liberally over the area and allow to dwell for 90 seconds to 2 minutes. Gently agitate the solution with a soft microfiber cloth in small circles to soften and remove existing bug remains.






Wash area with soap and water and apply a fresh coat of sealant or wax.




Tar Residue and Tree Sap

Wash area first.




Spray areas of stubborn tar with BLACKFIRE All N One All Purpose Cleaner and allow to dwell between 30 seconds and two minutes. Mist onto a microfiber towel as well.




Agitate with a soft microfiber towel gently by working in tiny circles. Apply additional BLACKFIRE All N One All Purpose Cleaner if needed until tar is fully removed.

PIC




Rinse thoroughly then rewash area if needed and apply a fresh coat of wax or sealant.






Engines

Engine cleaning should only be done if you are familiar with the various parts of an engine and take care to avoid direct water spray on sensitive areas. Damage can occur. Cover sensitive areas of the engine accordingly including the alternator, electrical connections, air intake, sensors, and ignition systems. The engine should be cool to the touch.




Spray BLACKFIRE All N One All Purpose Cleaner liberally over the engine bay. Saturate areas of heavy grease build up and allow to dwell for 90 seconds to 2 minutes.




Agitate areas of heavy soiling with a brush.






Rinse thoroughly. Make sure to avoid spraying water directly on sensitive parts.




Remove as much water as possible by use forced air or with absorbent multi-purpose microfiber towels.






Remove any materials used to protect sensitive parts and tart engine and allow to warm up to operating temperature.