BLACKFIRE Advanced Pad Cleaner

[tropicsteve]

Dear Friends

I haven`t used any Wet Diamond products yet (though I ordered the new polymer spray today), but once I finish using some of the stuff I`ve already bought, I`ll try it.

Given that Wet Diamond won`t wash out of pads, what do you do? Just clean them out using a regular effort, don`t worry about what`s left in the pads, and then just consider them dedicated Wet Diamond pads?

yep, that`s just what i do, wash them out, blot the excess with paper towels, and use them for bfwd only. never had a problem with re applications of bfwd. it`s funny , the bfwd is so easy on, easy off , but man does it permeate the foam pads !

[ZL1Mark]

I just bought some of this, mainly because I didn`t want to affect the actual microfibers with harsh cleaners. We`ll see how it goes.

[opie_7afe]

i found its way easier to remove sealants and waxes from pads if the product dries...for some reason it makes removal so much easier and you dont need to squeeze out that goopy wax/sealant out of the pad.....still dont make them brand new but much better then washing them with the wax/sealant still wet.

[Wax2aMax]

Can BF Pad Cleaner be used on MF hand applicators?

[Todd@RUPES]

Can BF Pad Cleaner be used on MF hand applicators?

Yes

[Wax2aMax]

Thanks Todd. I also wanted to confirm it is gtg on MF DA pads....might want to add that to the web description?

[Todd@RUPES]

Thanks Todd. I also wanted to confirm it is gtg on MF DA pads....might want to add that to the web description?

Yes absolutely safe for Microfiber Pads!

[skibik]

Question. I am interested in using the BFTPNS and plan on using the BFWD over that. Was going to do this next spring before going to my first show. I like the wet look on black that I have seen in photos and my question is if it is so hard to get BFWD out of the foam pad what does BFWD do to the MF towels? I know you let the product haze over before buffing off with the MF towels but will I have a hard time getting BFWD out of my towels? I don`t mind sacrificing a used pad for BFWD but hate to end up with MF grease rags.

[BobbyG]

No questions here Todd.

BlackFire Advanced Pad Cleaner is the most effective pad cleaner I`ve ever tried. I`m not sure what`s inside this product but whatever it is it works very well..

BlackFire Advanced Pad Cleaner is so easy to use. Simply spray it on the soiled pad, give it a minute or so to work, then wash and rinse. I was shocked at how clean my pads looked after using it vs. all other pad cleaners I`ve used.

BlackFire is one of those one brand lines that does it all, seriously.

[dd1101]

Question. I am interested in using the BFTPNS and plan on using the BFWD over that. Was going to do this next spring before going to my first show. I like the wet look on black that I have seen in photos and my question is if it is so hard to get BFWD out of the foam pad what does BFWD do to the MF towels? I know you let the product haze over before buffing off with the MF towels but will I have a hard time getting BFWD out of my towels? I don`t mind sacrificing a used pad for BFWD but hate to end up with MF grease rags.

Remember BFWD is dry when you are removing with towel, it gets soaked into the pad. I have removed BFWD with the pad cleaner and Dawn with no issues(it takes time). Never had issue removing from towels though. I use BF Micro wash to clean them.

[skibik]

Remember BFWD is dry when you are removing with towel, it gets soaked into the pad. I have removed BFWD with the pad cleaner and Dawn with no issues(it takes time). Never had issue removing from towels though. I use BF Micro wash to clean them.

Great, that is what I was thinking that is dry when taken of but concerned when washing. Thank you for the info.

Dean.

[Todd@RUPES]

Great, that is what I was thinking that is dry when taken of but concerned when washing. Thank you for the info.

Dean.

Perfect answer above.

IF you where to apply BLACKFIRE Wet Diamond with a microfiber towel then it would be difficult to remove completely because it would cure into the fibers of the towel.

However once the product has hazed (surface cured), the remaining residues will wash away easily.

[skibik]

Thanks Todd, appreciate the info. Now I will be waiting patiently for the fall back prices on Blackfire between now and next spring.

[Todd@RUPES]

Thanks Todd, appreciate the info. Now I will be waiting patiently for the fall back prices on Blackfire between now and next spring.

Sounds good!