Yeah TPnS is really a prep for the final step, so I would not use it with a rotary/3403 as a polish.with an reg orbital and mid speed level it disappears perfectly with a very minor buff off effort. love the stuff...
Yeah TPnS is really a prep for the final step, so I would not use it with a rotary/3403 as a polish.with an reg orbital and mid speed level it disappears perfectly with a very minor buff off effort. love the stuff...
Glen
21 X2 M35i
18 300 Xmax
How much product are you using? What size section? Try adding a very small amount and working it over a 3 x 3 section at speed 4. If this doesn`t work, shoot me a PM and I will send you out a different bottle. This is the first I have heard of this occurring so you may have a bad bottle. (Rare but possible).
I was doing a fairly large area, half a panel at a time. This is the first time I tried using TPS. From the get go I had problems. I primed the pad with complete coverage of the foam and went to work. Perhaps I loaded it up too much. I didn`t have to add any more product for the first half of the hood it seemed to go on well but never really worked till it dissapeared. I tried working it for a while but then it started getting gummy and even after it hazed over it was so diffiult to remove. I ended up giving up and went back to using GEP as this is so easy to work with and gives great results. I wanted to try the TPS since it has a little more cutting ability and the fact that it leaves behind some protection. Next time I`ll try a slower speed like 4 and work smaller areas.
But I must say by hand with a foam applicator the TPS did a great job of taking care of some isolated spots that had minor marring in the clear coat. And when I did work the spots by hand it was very easy to remove. Maybe I was putting too much heat into it with the flex.
Weird question, anyone ever use TPNS on a shower door? I`ve applied it many times to cars, now the fiancé and I are struggling with water spots on them. I figured my car stuff could help....., thoughts?
Great review. A bought a gallon after reading your review. I use it all the time with great results.
This is not a car product but since you say you are "Struggling" thought I would suggest what I have been using for years. It`s cheap, can get it about any grocery store AND it works! It`s a shower spray made by Arm and Hammer, called Scrub Free Clean Shower, Daily Shower Cleaner. Initially start off with a clean shower and there after simply spray it on the walls and shower doors each time or every other time after you shower and it will keep soap scum away and shower doors spotless. Can spray before you get out, because it has little odor. I use it religiously and haven`t scrubbed the shower for months! Hope it works for you. I think you will like it. Let me know?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks