This is my first attempt at actual glass polishing with a section of window with CarPro ceriglass polish & a CarPro Rayon 5" disc on my D/A.
The glass window itself was on a typical commuter car but in decent cond with no waterspots or any noticeable film/grime. I made sure the glass was absolutely clean before hand as well my rayon disc.
I did a firm pass on speed 4 & then wiped off the residue & repeated 3 times. For each pass I used a decent amount of polish & 2 small mists of water from spray bottle.


After clean up in typical outdoor light the glass looked new and more glossy. But under a small LED flashlight I can see very fine swirl like what a D/A produces. So my rayon pad is scratching the glass.
At first feel the rayon does strike me as quite abrasive being almost like a scotch brite pad.


Should the glass be swirl free under LED light? Or is this to be expected?


Please help, thanks