Thank you everyone for the input. My plan was to do a couple passes of D302 on a MF finishing pad to make sure any residual Jetseal didn`t interfere with soaking the spots. Turns out soaking was unnecessary, the spots were half gone. After another 4 or 5 passes the bumper looked clean again! So I finished up with a coat of Jetseal and then put a coat of Pete`s `53 wax on top of that. I need to apply a new coat of wax to the rest of the car, anyways, but I`ll get to that this weekend. I really, really appreciate all the help, this is an awesome community!
Since it`s a black car, and my daily driver, I am starting to see tiny spiderweb scratches. For future polishing my thinking is that I would start with Menzerna 3500 on a white polishing pad (or equivalent if I`m not using hex logic pads) and if that doesn`t take care of things I`ll try Optimum Hyper Polish and an orange pad or a MF finishing pad. Does that seem like a reasonable approach?
Again, thanks for all your help!
Bookmarks