Sonus SwirlBusterâ„¢

[superchargedg]

If you use a regular polish after the SwirlBuster polish you will be wasting the benefit. A polish will remove the acrylic coating applied with the SwirlBuster polish.



We will be coming out with a finer version of SwirlBuster called "ClearCoat Polish.



db

thanks im glad i asked this question.it will be the first time ive used a pc so im kinda excited to see what it can do.

[ImolaOrange]

Hi,

I`m thinking of using this product on my orange S2000. I was wondering how I should include it into my group of products.



My twice per year clean is this:

1. Wash Megs Gold Class

2. Clay Megs Quick Clay

3. Wash again

4. Polish Megs Deep Crystal Polish

5. Megs No 7 Glaze

6. Wax P21S



Where in that lot do I use the SwirlBuster?



Thanks

Alan

[Joshua312]

Alan,



It would probably be used in place of your Step 5 (Megs#7)

[dmk112]

Can someone answer this question...



I bought the UDM along with this swirlbuster and I`m wondering how this comes into play with the SFX1, SFX2, & SFX3 system explained in this article (http://www.autopia.org/publish/artic...ide/Page1.html)



Is the swirlbuster used in addition to these polishes or eliminate them??

[Mr.Jenkins]

Can someone answer this question...



I bought the UDM along with this swirlbuster and I`m wondering how this comes into play with the SFX1, SFX2, & SFX3 system explained in this article (http://www.autopia.org/publish/artic...ide/Page1.html)



Is the swirlbuster used in addition to these polishes or eliminate them??

SFX2 is the same as swirlbuster I do beleive.

[Setec Astronomy]

It`s not "the same". It may have the same cut, but unless something has changed, the Swirlbuster polish has an acrylic filler in it.

[cdodkin]

Can someone answer this question...



I bought the UDM along with this swirlbuster and I`m wondering how this comes into play with the SFX1, SFX2, & SFX3 system explained in this article (http://www.autopia.org/publish/artic...ide/Page1.html)



Is the swirlbuster used in addition to these polishes or eliminate them??

SwirlBuster replaces SFX2 and SFX3 in my experience, as it can handle the same issues that I would previously have used them for.



SwirlBuster has a new polish technology, that breaks down the polish particles during the polishing process - allowing you to go from surface defect correction, all the way to final surface preparation, all with one polish and pad.



Swirlbuster is a great surface prep to use before wiping down and applying your last step sealant/wax.



You`d only ever use SFX1 is you had significant surface defects which would not polish out with Swirlbuster - and in this case you`d use SFX1 and a polishing pad first, followed by SwirlBuster, then Sealant/Wax.