Ssr2.5 ?

[maxshine]

SSR2.5 is somewhat equal to DACP # 83 ?

If SSR2.5 is used SSR1 can be used to clean up any minor marring and SSR2 isn`t really needed ?

SSR2.5 basically can take the place of SSR2 since SSR2.5 has diminishing abrasives like DACP ?


Thanks

[Hawaiianelement]

you`re right !!

after 2.5 don`t automatically go for ssr1 . Check your finish first . 2.5 is soo good you might be able to go right to wax/sealant. I haven`t found any marring from using 2.5 w/cutting pad w/PC.

[awd330]

I find that SSR2.5 is similar in cutting ability to DACP, but SSR2.5 breaks down more easily and is less prone to inducing micromarring. I don`t think it is really a substitute for SSR2. There are situations where SSR2 would be the better choice. If you are looking to hold down product costs, then I would say that the SSR2.5/SSR1 combo would be more useful than let`s say a SSR2.5/SSR2 or SSR2/SSR1 combo. Ideally, you`d want to have SSR2.5/SSR2/SSR1 on hand for best results.

[CamaroZboy]

SSR2.5 :drunk . Hale-Luja

Cory