Guys/gals..need your assistance.

[cgc2]

Water hit my car(broken sprinkler) during the night at the hotel I was staying at. :ticked
My car had been clayed, VM/2 coats of EXP and coat of Nattys.

Now there are water spots on it. I S&W`d and QD`d, and really toned down the spots, but they are still there.

What should I do to remove ?

Chris Coronel

[Poorboy]

get some polish to it quick...the minerals from the sprinklers are very harsh and there is little if anything that can with stand it, especially if it starts to bake in the sun:eek :bigscream

Here`s a quote from Dwayne:

One thing to consider is that waxes and sealants are "sacrificial" barriers and not, despite some companies claims, "inpenatrable" barriers.

Highly acidic contaminants (bug splatter, bird bombs) or highly alkaline contaminants (rail dust, hard water, or water containing a strong alkaline soap solution) can damage even the best sealant when alowed to cook in the sun on a hot painted surface.

If even the clearcoat which is a fully cured urethane coating can be etched or damaged by these things if exposed to them then how much more so can a microscopic wax or sealant layer be damaged if exposed to the same elements.

Don`t be discouraged. You may need to start over by completely cleaning your paint with the vinegar solution. Wash with a car wash soap to nuetralize the paint. Try using detailing clay to remove anything above the surface. Try a mild paint cleaner and only go more agressive if necessary.

Once you obtain a flawless finish go ahead and start adding protective wax or sealants.

Dwayne

This is the thread it came from..it might help:dunno

http://www.detailcity.com/forums/showthread.php?t=5935

Steve

08-04-2004, 10:06 AM

[Don]

:yeah

Grab the Vanilla Moose and start over (like polishing & waxing is a "chore") The wax took the hit so the paint didn`t have to, now you just have to clean & prep (wax) the car to get ready for the next `hit.`