Stripping Sealant.

[dd1101]

I am looking to try a new sealant on my Wifes SUV and my older Acura.

The paint is in great condition, I might have to do some spot buffing with 105/205 on my wifes car.

But for the sealants on the car right now, my wifes car got a coating of BFWD back in June, a coat of BFCS in August and another coat 3 weeks ago.

The car wash soaps I have are Ironx Snow soap, BF, and Griots.
Whats the safest best way to strip the sealant off?
Ironx then IPA?

[Paul Sparks]

I use the Iron-X but have never been a fan of a ipa wipe down. Never had a problem so far.

[TroyScherer]

The best way is to wash w/ 1-2 oz of APC in the wash, then Iron-X, Clay, Seal...

[07gtcs]

I`ve also sprayed APC 4:1 one the wet surface and then washed with dawn.

[dd1101]

I use the Iron-X but have never been a fan of a ipa wipe down. Never had a problem so far.

Thanks

The best way is to wash w/ 1-2 oz of APC in the wash, then Iron-X, Clay, Seal...

Ok this will work since I do have all the above.

I`ve also sprayed APC 4:1 one the wet surface and then washed with dawn.

Thanks

[Wheelzntoys]

Agree on Dawn and APC combo.

Sealants are not as easy as wax to remove.

[polisher]

ya i will have to agree too

[BobbyG]

To completely strip the existing sealants and wax give each panel a good cleaning with a paint cleaner. This will also remove stains, embedded grime, and slight oxidation......

[addysdaddy]

fwiw, he is my regiment.

• wash with 2x the concentrate of quality car shampoo - no dawn as it tends to dry out rubber bits
• IronX if needed
• Spray entire car with P21s TAW, lightly agitate with schmitt, let dwell for 10 minutes. Rinse thoroughly
• Clay
• KAIO via DA
• Final wipe down with Menzerna Top Inspection to remove any residual oils.

At this point either compound/polish or go directly to your favorite LSP.

[Rocket]

To completely strip the existing sealants and wax give each panel a good cleaning with a paint cleaner. This will also remove stains, embedded grime, and slight oxidation......

I agree. I have a bottle of P21s paint cleaner for this purpose.

[CT3]

I`ve been using Pinnacle paint cleansing lotion for this.

[addysdaddy]

I`ve been using Pinnacle paint cleansing lotion for this.

I tried a sample of this & the BF version and didn`t think either cleaned as well as KAIO - at least comparing the dirt level of the white flat pad I was using. Without a doubt the KAIO pad contained more dirt then either the Pinnacle or the BF. With that said, keep in mind that`s all I`m asking from my AIO solution, so YMMV.

[dd1101]

When looking at all the paint cleanser like Pinnacle Paint Cleaning, P21S, Blackfire GEP, and Wolfgang Paintwork; Is there a difference? All of these chemically clean the surface for a LSP right.

Does one work better than another.

[Beemerboy]

To completely strip the existing sealants and wax give each panel a good cleaning with a paint cleaner. This will also remove stains, embedded grime, and slight oxidation......

I couldn`t agree more!

PB Pro-polish is one of the best IMO for cleaning paint

[dd1101]

Also would something like M205 clean paint?