Quote:
Originally posted by zesty-man
1. i used the fastest speed...
2. it took me around 40ish minutes for the hood, and around 10 minutes per panel
3. on the hood (the worst part), i used 2 coats of both the ssr2 and the ssr1
4. im prety certain the pads were clean, beceause i just opened them..
5. i beileve the pads were properly primed before usingf
6. i got no digital camera :(, but ill try to go out and buy one this weekend.
I probably would have run the PC at a slower speed for SSR1 (4-4.5), but it otherwise sounds like you followed the proper series of steps. The only further suggestions I can provide are to use high quality microfiber towels for removing the residue, and possibly move up to a slightly more abrasive product (SSR2.5 or DACP) and/or a more aggressive pad (cutting). Beyond that, it`s likely that you will need to find a rotary expert for more serious paintwork correction.