Results 1 to 4 of 4
  1. #1
    Privitize it shotime's Avatar
    Join Date
    Feb 2004
    Posts
    509
    Post Thanks / Like

    Fix for buffing pads

    I found a fix for pad failure. For the hell of it I tried to reattach the Meg`s pad that flew off the other day with some 3M emblem adhesive I had laying around. I put it all over the pad, stuck the backing on, then put a bead around the outside. After that it was left over night. The next day it was dry so I tried to use it. Just like new! So far it`s been used on 2 cars, once with a PC and with a rotory. I had another pad that was beginning to fail so I put a bead on the outside of that. After 4 uses it hasn`t got any worse and is solidly attached. The trick is to almost inject it into the pad and leave a little on top. Then take your finger and spread it flat, getting only about 1/8th in. on the velcro. Sounds wierd but it works.

  2. #2
    Owner and Tech. Rep Nickc0844's Avatar
    Join Date
    Feb 2004
    Location
    Atlanta (Woodstock), Georgia
    Posts
    1,680
    Post Thanks / Like
    Good call on that one!

    I think my next pad buy will be the Edge 2000 with the quick connect for a rotary.
    Nick Carberry
    ~Detailing high-end cars with quality products~

  3. #3
    Darth Camaro 12/27/15 Don's Avatar
    Join Date
    Dec 2002
    Location
    NE Ohio
    Posts
    2,465
    Post Thanks / Like
    Great idea, I was thinking the same thing, but was considering using GOOP or silicone adhesive/sealant. I use LC pads at the moment, but if I ever pick up some Megs pads, and they come apart, now I have a proven method to fix them.
    Don M

    Proud owner of a 2017
    SUPERCHARGED
    Hyper-Blue Metallic 2LT 6/Manual
    Camaro


  4. #4

    Join Date
    Mar 2004
    Location
    New Jersey
    Posts
    369
    Post Thanks / Like
    Wow. That is amazing, considering a new pad is like 10$.

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. buffing pads?
    By itshines in forum Car Detailing
    Replies: 17
    Last Post: 05-20-2009, 11:18 AM
  2. Buffing Pads
    By jmontgom in forum Paint Correction and Gloss Enhancement
    Replies: 4
    Last Post: 10-31-2004, 06:00 AM
  3. Buffing pads
    By Balucanb in forum Car Detailing
    Replies: 1
    Last Post: 08-14-2003, 07:16 AM
  4. What buffing pads do you use?
    By jlward1946 in forum Car Detailing
    Replies: 12
    Last Post: 04-12-2002, 01:55 PM
  5. Any one used the 3m buffing pads??
    By bwp86 in forum Car Detailing
    Replies: 1
    Last Post: 01-28-2002, 09:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •