Alright,
the reason I joined here.
Best way to make black paint look new again?
Alright,
the reason I joined here.
Best way to make black paint look new again?
Lot of the guys swear by Poorboys. Great products and very good prices. Don`t know condition of the paint or what tools you have.
But I would first wash. Then clay bar the whole vehicle, probably a lot of contaminants. Then a swirl remover on a PC, Followed by Poorboys Black Hole Glaze on the PC. Lastly a polish or wax. Really hard to give you a definitive answer without seeing the vehicle and knowing what you have to work with.
I have limited equipment.but do have access to a buffer.
What else would I need?
Heres the car.
Minor swirls.
Thin paint as per peoples past expirences with early build MM.
that is a cool car, If It were mine I would invest in a poorboys world porter cable kit from detailcity.com as all that you would really need would be contained in the kit. I would add to this purchase a tub of natty`s red. It looks like you are in a rough part of town. TD
you have many options, but if you have thin paint be careful polishing by machine. You would want to use chemical polish vs a mechanical stay away from cutting pads if you do use a machine ... you will also want to use a glaze and then top it with wax/and or a sealant
Great car !!!
Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!
Poorboy`s Polish with Carnauba - Blue is my favorite all in one for black paint. It works great by hand or machine. Top with Poorboy`s EX or Natty`s Blue Paste Wax for an even better look and protection.
"The trouble is that you think you have time." - Jack Kornfeld
LOL
I`m not in a bad part of town.
It was part of a photo contest.
Do you guys have any links for the products mentioned.
I should tell you.
The Marauder is a show car.
It`s rare therefore it goes to alot of shows.
I would LOVE to get a show car detail on it. Any tips on how to get the paint great is welcome.
I can already see I am in the right place for this.
Old Enough To Know Better, Too Stupid To Care....
Dave`s Detailing
Sonoma County, CA
What is a good clay bar?
And what the hell do I do about the dust on it at shows lol.
Meguiars NXT2, or Poorboys Black Hole and EX or Natty Blue.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks