Pepsi stain on `05 Jetta seat

**jgh1987** · 02-22-2007, 08:05 PM

Anyone got some ideas to clean this seat up?

**Beemerboy** · 02-22-2007, 08:18 PM

I would use Folex on that, or a good APC mixed with water 10/1....use a brush to loosen up the area, spray on and continue brushing...use a misting of water to get the seat wet then use your shop vac to lift as much of the water as possible

**jaybs02** · 02-22-2007, 08:20 PM

I have had great results with folex.
It has gotten coffee stains out of my light colored carpet after it has been sitting some time.

Good luck
"J"

**jgh1987** · 02-22-2007, 08:27 PM

Beemerboy,

is that what you mean by APC? Cause I have a bottle of that already.....whats a good site to get Folex from? Checked autogeek and didnt see it

**Poorboy** · 02-22-2007, 08:35 PM

Originally Posted by jgh1987

Beemerboy,

is that what you mean by APC? Cause I have a bottle of that already.....whats a good site to get Folex from? Checked autogeek and didnt see it

Try it diluted 15:1 in a seperate bottle, then with a bucket of warm water scrub well with a nylon upholstery brush and vacuum ...

**Beemerboy** · 02-22-2007, 08:40 PM

Steve hit the nail on the head....for Folex you can buy the in any Target, Wally World places like that

**Brenton** · 02-22-2007, 08:55 PM

Did you try hot water?
I get a lot out with hot water and a shop vac. Those VW seats are tough to work with. Try that first before a strong product.

**jgh1987** · 02-22-2007, 08:56 PM

Could you explain the 15:1 dilute to me?

**jgh1987** · 02-22-2007, 08:57 PM

Originally Posted by PEI Detail

Did you try hot water?
I get a lot out with hot water and a shop vac. Those VW seats are tough to work with. Try that first before a strong product.

Havent gotten a chance to try anything yet. Its my girlfriends car and will get my chance tomorrow...but ill keep that in mind

**Poorboy** · 02-22-2007, 09:10 PM

Originally Posted by jgh1987

Could you explain the 15:1 dilute to me?

15 ounces of water to one ounce of APC

if you take an empty quart bottle fill it with 30 ounces of water and then add 2 ounces of APC ..shake..lightly and it`s ready to go ..if you need to make it stronger later you can just add a little more APC