Tell me how and when to use these products

[Coatings=crack]

Amazing. Thats what Im shooting for. Black is a pain, but nothing looks better when its clean lol.

Pics when you get the wheels mounted. What size,type rims and tires....


Sent from my iPhone using Tapatalk

[The Guz]

I will try the Lite first, per your advice. I was thinking about the Gliss on top of the Lite, so I would not need any type of wax correct?

That is correct. Gliss will add that slickness to Lite. You can use the hybrid ceramic detailer as a maintenance product if you desire a drying aid.

[Mustang19]

Pics when you get the wheels mounted. What size,type rims and tires....


Sent from my iPhone using Tapatalk

Velgen VMB5 matte gunmetal
20x9 with 255/35 BFGoodrich Comp 2`s
20x10.5 with 305/35 BFGoodrich Comp 2`s

https://www.fitmentindustries.com/wh...en-vmb5-pedder

[Coatings=crack]

Velgen VMB5 matte gunmetal
20x9 with 255/35 BFGoodrich Comp 2`s
20x10.5 with 305/35 BFGoodrich Comp 2`s

https://www.fitmentindustries.com/wh...en-vmb5-pedder

Tou thought of 10.5’s squared? Get you that deep concave in rhe front too


Sent from my iPhone using Tapatalk

[Mustang19]

Ok guys, I think I screwed up. I just got done doing everything up to the Jetseal because thats what I have on hand. I read on there that it should get wet for 12 hours. Does that mean I should wait 12 hours to put the Meguiar`s ceramic spray wax on? What if I already sprayed the hood with the wax lol? It does not seem to be coming off easily and leaving streaks.

[Accumulator]

Mustang19- I responded to the "oops!" on the other thread (for what it was worth..probably not much ), but hey..if that`s the only real problem you encountered through this whole detail then IMO you did fine. Lesson learned about letting JetSeal cure, far worse things can happen...and often do! I bet it looks great, well..other than the soon-to-be-OK hood