Put Ult Fast Finish on too thick, high spots everywhere. Need Advice

[Don]

As the title says, I used too much UFF last time I applied it to the car and now I have high spots/streaking all over. In order to remove them, should I: 1) Rewash the car and reapply the Ult Fast Finish thinner and immediately buff it off section by section, OR 2) Will something like D115 @ 8:1 or Ult QD level out the finish & remove the streaks?

[Mike lambert]

I`ve always been told like fixes like, try re applying it? Certainly can`t hurt.

[Don]

I`ve always been told like fixes like, try re applying it? Certainly can`t hurt.

You were right, and I should have known that. I had been using a microfiber covered sponge as an applicator, but to correct my issue, I used a folded microfiber cloth as directed. WHAT A DIFFERENCE! The UFF went on smoother, even faster and much more evenly. The car looks great again with no high spots or streaks anywhere.

I highly recommend using the folder microfiber towel for an applicator of Ult Fast Finish.

[BudgetPlan1]

I highly recommend using the folder microfiber towel for an applicator of Ult Fast Finish.

Have found that a folded low nap microfiber like a Gyeon Baldwipe towel makes a great product applicator; saves me from my sometimes overzealous product usage.

Sent from my SM-G930T using Tapatalk