Page 1 of 8 12345678 LastLast
Results 1 to 15 of 119
  1. #1

    Join Date
    Aug 2016
    Posts
    41
    Post Thanks / Like

    Advice on filling swirls, will this process work?

    Last fall I bought a Redfire Ford Fusion. I clayed the car, applied Klasse AIO, then Klasse SG. The combo added the nice reflection I was expecting but also a bit of a wet look. A couple of weeks ago during the last Autopia sale I bought some Pinnacle Souveran and love it, a very wet look on the car.

    But the car still has some swirls. I don`t want to attempt to remove them, so I have been researching options for filling the swirls. I`ve seen many endorsements of Poorboy`s Black Hole Show Glaze as a nice filler of swirls.

    Here`s my question: Could PB`s BH be used in conjunction with the Klasse Twins? I`ve seen some that claim that Black Hole could be applied after the AIO and before the SG.

    So could I use this process:

    Wash
    Clay
    Wash
    AIO
    Black Hole
    SG
    top with Souveran

    If so, how would the Klasse SG react with the Black Hole? SG typically lasts several months for me, but when it`s adhering to paint that has Black Hole on top of it, would that lessen the length of protection the SG would provide?

  2. #2
    512detail's Avatar
    Join Date
    May 2013
    Location
    Kyle, Tx
    Posts
    9,203
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    one way to find out!


    Brandt K.

  3. #3
    Wax Waster Ronkh's Avatar
    Join Date
    Mar 2008
    Location
    SwFL
    Posts
    27,090
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Black hole will not work with the Klasse twins.
    Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!
    Likes rlmccarty2000 liked this post

  4. #4

    Join Date
    Aug 2016
    Posts
    41
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Is that true for any sealant or just Klasse SG? Because in this thread, a rep from Poorboy`s World seems to be saying you can use it before a sealant - Poorboys black hole glaze review

    Additionally, if it`s just an issue with Klasse SG, what sealants could you recommend that would work well with Black Hole?

  5. #5
    Mary B's Avatar
    Join Date
    Jan 2016
    Location
    Lakeville Mn.
    Posts
    1,508
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    If you have P. Souveran.
    I`d just use PBs Blackhole and top with 2 coats of Souveran
    Then post some Pics please..
    Likes MackCollier, rlmccarty2000 liked this post

  6. #6
    Wax Waster Ronkh's Avatar
    Join Date
    Mar 2008
    Location
    SwFL
    Posts
    27,090
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    works with most sealants
    just not ksg
    Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!
    Likes MackCollier liked this post

  7. #7

    Join Date
    Aug 2016
    Posts
    41
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Quote Originally Posted by Ronkh View Post
    works with most sealants
    just not ksg
    Thanks, so everything else is fine, I just need to get a new sealant to replace Klasse SG? I assume PoorBoy`s sealants would work well with Black Hole? In your opinion which would work better, EX or EX-P? Thanks!

  8. #8
    Wax Waster Ronkh's Avatar
    Join Date
    Mar 2008
    Location
    SwFL
    Posts
    27,090
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    EX has more filling power if I remember correctly
    Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!
    Likes MackCollier, 512detail, Poorboy liked this post

  9. #9

    Join Date
    Aug 2016
    Posts
    41
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Quote Originally Posted by Ronkh View Post
    EX has more filling power if I remember correctly
    EX says it has carnauba, so that makes sense. This is great, it will give me a chance to try out some PoorBoy`s products as I`ve read a look of good things here about them.
    Likes Poorboy liked this post

  10. #10
    Wax Waster Ronkh's Avatar
    Join Date
    Mar 2008
    Location
    SwFL
    Posts
    27,090
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Hint.....

    Apply black hole. - Do Not remove

    Apply EX over bh, then let haze, then wipe off.
    Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!
    Thanks zeus65 thanked for this post

  11. #11
    512detail's Avatar
    Join Date
    May 2013
    Location
    Kyle, Tx
    Posts
    9,203
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Quote Originally Posted by Ronkh View Post
    Hint.....

    Apply black hole. - Do Not remove

    Apply EX over bh, then let haze, then wipe off.
    words from the king!

    it works, I know from 1st hand experience

    but you forgot chilled spray and gloss


    Brandt K.
    Likes Ronkh liked this post

  12. #12
    WaxAddict's Avatar
    Join Date
    May 2014
    Posts
    1,511
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    I can wholeheartedly recommend Black Hole then Natty`s Blue wax. Natty`s asts about as long as EX and it looks amazing. I have a pic somewhere, I`ll dig it out.
    Likes Ronkh, Poorboy liked this post

  13. #13
    Wax Waster Ronkh's Avatar
    Join Date
    Mar 2008
    Location
    SwFL
    Posts
    27,090
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    black hole + ex day one
    nattys blue tomorrow
    ftw
    Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!
    Likes WaxAddict, Poorboy, zeus65 liked this post
    Thanks zeus65 thanked for this post

  14. #14

    Join Date
    Aug 2016
    Posts
    41
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Quote Originally Posted by Ronkh View Post
    black hole + ex day one
    nattys blue tomorrow
    ftw
    Just ordered Black Hole and EX, will top with the Souveran I ordered last month, thanks to all for the advice!
    Likes Poorboy, Mary B liked this post

  15. #15
    Wax Waster Ronkh's Avatar
    Join Date
    Mar 2008
    Location
    SwFL
    Posts
    27,090
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    perfect !
    Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!
    Likes MackCollier liked this post

 

 
Page 1 of 8 12345678 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Product Filling - What`s your process to determine it??
    By David Fermani in forum Car Detailing
    Replies: 15
    Last Post: 03-02-2012, 10:42 PM
  2. Filling swirls, qd with fillers?
    By ron231 in forum Car Detailing
    Replies: 7
    Last Post: 02-01-2007, 09:27 PM
  3. Replies: 2
    Last Post: 07-11-2006, 01:56 PM
  4. New guy need a process to get rid or swirls
    By TacomaWillis in forum Car Detailing
    Replies: 2
    Last Post: 05-15-2006, 02:17 PM
  5. Will this process work?
    By CaliPhotog in forum Car Detailing
    Replies: 5
    Last Post: 08-10-2005, 02:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •