PC counterweight

**Chris R** · 06-08-2003, 02:24 AM

Which counterweight are you guys using, the 5" or 6"? Notice any difference?

Thanks,
Chris

Boss_429 · 06-08-2003, 08:24 AM

I`m using the 6" counterweight, with the 5" backing plate, and the 6 1/2 in pads. Seems to work fine. I`m sure other people have tried other combinations with good luck too.

**CharlesW** · 06-08-2003, 10:25 AM

My setup is identical to Boss`s and seems to work fine. Since it is the only combination I have used, I can`t comment on how different pads, plates, and counterweights perform.

**EBPcivicsi** · 06-08-2003, 10:39 AM

I use the 6" weight with a 5" backing plate and 6.5" pads, I have used the same combination with the 5" weight. IMO the 6" weight with the 5" backing plate and 6.5" pad is smoother(less vibnration at high speeds).

I have also used the 6" weight with the 6" backing plate and a 9" pad. I have only done this once and so far I liked it when working on vehicles that are larger. I do not know if this is a good combination for the machine, but it worked very well for what I was using it on.