0 Degree wash + polish

[imported_Reflections]

I received my Menzerna products today, and wanted to try them out. Unfortunately it was below freezing in my garage. The topic of steam cleaning paint has been floating around the last few days, so I decided to spray QEW on my frozen hood, then I steamed the hood and followed with a mf wash mitt, then followed with a drying towel. It got the hood clean.

Here`s the process I followed with:

-PC + IP

-FPII

-FTG

-FMJ

-Natty`s blue (got that today too)

My new camera took some neat shots. The cam is a Sony Cyber-Shot DSC-H1. This hood was polished maybe a month ago, although I took it through the scratchy wash a couple times. Here`s a before shot:

[imported_Reflections]

Some afters:

[imported_Reflections]

A feather from my coat landed on the paint so I took a couple pics of it. That`s actually the reflection below it.

[imported_Reflections]

I really had to work the FP2 to work out the swirls. There was still quite a few left before I put the glaze on. I only did half the hood. I think it`s a good idea to avoid polishing below freezing whenever possible, especially with a PC :ca