1andrews
09-12-2005, 12:27 PM
I`m considering trying menzerna powergloss, as I find a lot of cars I`m doing for people are too water etched and swirled to get higher than about 90% of the finish back with a PC and DACP or IP (a lot of these cars are a 02-04 subarus). This also means a step up to a rotary I think, although maybe I should just try sticking to the PC first.
The plan:
menzerna powergloss on a rotary with a LC orange or possibly yellow pad.
and then either:
FP with a PC and white pad (will this be strong enough to get the gloss back?), for cars I am going to seal.
or
Meg`s speed glaze with PC and white pad, for the cars I am not using a sealant on.
The plan:
menzerna powergloss on a rotary with a LC orange or possibly yellow pad.
and then either:
FP with a PC and white pad (will this be strong enough to get the gloss back?), for cars I am going to seal.
or
Meg`s speed glaze with PC and white pad, for the cars I am not using a sealant on.