View Full Version : SSR1 or Poorboys PWC
Richt
08-22-2005, 12:58 AM
Just about to do an order, can the PWC be used after say SSR 2.5 to do the same job as SSR 1?
Cheers
Rich
03k20a2
08-22-2005, 05:16 AM
what is pwc
Richt
08-22-2005, 05:23 AM
Poorboys Polish With Carnuba
imported_Picus
08-22-2005, 06:18 AM
Yes, unless you left quite a bit of hazing with SSR2.5. If you`re using SSR2.5 with a polishing pad or lighter you can probably follow up with PwC just fine. Or, on the other hand if you do use 2.5 with a cutting pad just follow it with 2.5 on a polishing pad to remove haze, then move to PwC.
Beason
08-22-2005, 02:16 PM
SSR1 is a pure polish and leaves a great finish READY for LSP. PwC isnt as great of a polish, but still very good but the thing it has over SSR1 is you dont have to top it with anything after since it does contain wax. PwC is my favorite 1 step polish/wax. But if im doing multiple steps I use SSR1. If you only need one get PwC
rollman
08-22-2005, 03:01 PM
Not to confuse you even more but PPP by Poorboys is a nice product. :buffing:
Beason
08-22-2005, 03:38 PM
Also dont forget the Poorboys Polish w/ Carnuaba Blue, for darker colors
Scottwax
08-22-2005, 08:30 PM
PwC is more of a glaze than a polish, it cleans about as well as AIO but like AIO it really won`t remove much in the way of surface defects. Incredibly good base for carnaubas. If there is no hazing after 2.5 you can go straight to PwC.
Richt
08-23-2005, 12:03 AM
Cheers all. I think I will go for the SSR 1 this time, and leave the PWC for now.