klnyc
08-21-2005, 05:38 AM
Anyone had that? I want to remove all the wax and sealant. I know ISO (50/50) will work, but you need to spray it down w/a sprayer(too slow). And there`s other wax cleaner products you can buy from Hi-Temp,FK1,etc. So long story short anyone had try this method? I know we/some of us use vinegar to clean the Mf. Oh well
chml17l
08-21-2005, 07:57 AM
Anyone had that? I want to remove all the wax and sealant. I know ISO (50/50) will work, but you need to spray it down w/a sprayer(too slow). And there`s other wax cleaner products you can buy from Hi-Temp,FK1,etc. So long story short anyone had try this method? I know we/some of us use vinegar to clean the Mf. Oh well
Vinegar is great for some light water spotting, but a good sealant like SG or Z2pro, etc. can probably withstand it and not be fully removed. IPA is just a cheap, convenient solution that will remove just about everything out there. You could also use some Prepsol or a citrus-based degreaser, but you`re still going to have to find some way to spray these onto the paint or just soak a sponge in the solutions and keep going over the paint. The P21S total body wash is a great choice (but kind of $$) if you use it alot, but it is quite safe for not drying out trim pieces.