Can you wax too soon over sealant

[kf4915]

I recently polished by black car with Poorboys 2.5 a 1 and it looked great no swirls and a great shine.



I immediately applied Wolfgang Sealant then Souvern carnuba. The car seems to have a slight haze and not shine precisely as expected. Should I have waited to apply the Souvern? What can I do to fix?



Thanks

[JeffM]

Either set it out in the sun to dry off, and wipe it down with a QD.



Or wash the vehicle, or polish /w SSR 1 again and start over.

[chml17l]

I recently polished by black car with Poorboys 2.5 a 1 and it looked great no swirls and a great shine.



I immediately applied Wolfgang Sealant then Souvern carnuba. The car seems to have a slight haze and not shine precisely as expected. Should I have waited to apply the Souvern? What can I do to fix?



Thanks

Wolfy is a water-based polymer sealant. The polymer needs ~ 12 hours (depending on temp. and humidity) to fully cure before being exposed to water. Your immediate application of the Souveran wax has probably interferred with the polymers ability to fully cure. If JBM`s suggestion doesn`t work you may need to clean everything off and start over.