Lochi
01-10-2005, 12:15 AM
Well, yesterday was my first time using my Bosch rotary. I practiced in a old hood. The paint is single stage, and it was a disaster, paint overspray, coebweb swirls, scratches, oxidation, acid rain, tree sap, bird bombs, etc. So i decided to wetsanding it before polishing.
I doesn`t have a compound, the most agressive product that i have is #83 DACP, so I did not be able to remove completely the wetsanding marks.
After seeying this pics, i think that the results are awesome, considering the previous condition and that is the first time using the rotary.
The process:
Sonax Wash x2
SonĂ¼s Clay
Wetsand w/ 1500 grit sandpaper
#83 DACP via rotary w/ LC Yellow Cutting Pad @ 1700 rpm
#80 SG via rotary w/ LC White Polishing Pad @ 1500 rpm
EX-P by hand
Greetings, Lochi :bigups
PS: Sorry for my bad english. :dunno
Before:
http://img45.exs.cx/img45/6122/tndsc000179do.jpg
http://img45.exs.cx/img45/2549/tndsc000204qh.jpg
After wetsanding:
http://img45.exs.cx/img45/4614/tndsc000332fc.jpg
After #83, #80 and EX-P
http://img45.exs.cx/img45/2340/tndsc000605wy.jpg
http://img45.exs.cx/img45/3567/tndsc0006116je.jpg
http://img45.exs.cx/img45/8156/tndsc000698jr.jpg
I doesn`t have a compound, the most agressive product that i have is #83 DACP, so I did not be able to remove completely the wetsanding marks.
After seeying this pics, i think that the results are awesome, considering the previous condition and that is the first time using the rotary.
The process:
Sonax Wash x2
SonĂ¼s Clay
Wetsand w/ 1500 grit sandpaper
#83 DACP via rotary w/ LC Yellow Cutting Pad @ 1700 rpm
#80 SG via rotary w/ LC White Polishing Pad @ 1500 rpm
EX-P by hand
Greetings, Lochi :bigups
PS: Sorry for my bad english. :dunno
Before:
http://img45.exs.cx/img45/6122/tndsc000179do.jpg
http://img45.exs.cx/img45/2549/tndsc000204qh.jpg
After wetsanding:
http://img45.exs.cx/img45/4614/tndsc000332fc.jpg
After #83, #80 and EX-P
http://img45.exs.cx/img45/2340/tndsc000605wy.jpg
http://img45.exs.cx/img45/3567/tndsc0006116je.jpg
http://img45.exs.cx/img45/8156/tndsc000698jr.jpg