Help hazing and holograms after SSR2.5

[imported_Keggus]

After finishing my suby (SSR2.5, SSR1, AIO, SGx5 and Souveran) I took it out in the sun for the first time today. There are holograms and hazing on both of the doors on the drivers side. I thought maybe I had not removed a product properly so I removed them with 50/50 alcohol and water. They were still there. I then tried SSR2.5 again but now they are even worse.

Please help. :(

http://i19.photobucket.com/albums/b160/keggus/DSCF0622.jpg

http://i19.photobucket.com/albums/b160/keggus/DSCF0623.jpg

http://i19.photobucket.com/albums/b160/keggus/DSCF0624.jpg

Here you can see where the tape prevented the hazing

[imported_Keggus]

After finishing my suby (SSR2.5, SSR1, AIO, SGx5 and Souveran) I took it out in the sun for the first time today. There are holograms and hazing on both of the doors on the drivers side. I thought maybe I had not removed a product properly so I removed them with 50/50 alcohol and water. They were still there. I then tried SSR2.5 again but now they are even worse.

Please help. :(

http://i19.photobucket.com/albums/b160/keggus/DSCF0622.jpg

http://i19.photobucket.com/albums/b160/keggus/DSCF0623.jpg

http://i19.photobucket.com/albums/b160/keggus/DSCF0624.jpg

Here you can see where the tape prevented the hazing

[Scottwax]

What is your technique?

[Scottwax]

What is your technique?

[imported_Keggus]

I primed a white wolfgang white polishing pad with meguiars QD applied a cross of SSR2.5 to the pad, spread the SSR2.5 on a slow speed, when it was spread I sped up and continued until the product almost dissapeared and removed with a MF.

[imported_Keggus]

I primed a white wolfgang white polishing pad with meguiars QD applied a cross of SSR2.5 to the pad, spread the SSR2.5 on a slow speed, when it was spread I sped up and continued until the product almost dissapeared and removed with a MF.

[Scottwax]

I`m not familar with that pad. I normally use a Meguiars yellow polishing pad with 2.5 and I`ve never had a hazing problem. Try cutting out the QD and see if that helps. It may be affecting the way 2.5 is breaking down.

[Scottwax]

I`m not familar with that pad. I normally use a Meguiars yellow polishing pad with 2.5 and I`ve never had a hazing problem. Try cutting out the QD and see if that helps. It may be affecting the way 2.5 is breaking down.

[travisdecpn]

Two other things you may want to try is to work in smaller sections and slow your arm movement down.

[travisdecpn]

Two other things you may want to try is to work in smaller sections and slow your arm movement down.

[imported_DARKSTI]

dont prime the pad. poorboy himself said that can screw with polish.

[imported_DARKSTI]

dont prime the pad. poorboy himself said that can screw with polish.

[randomman84]

ya dont prime the pad the pad needs to be dry for the polish to break down. Hint: Friction and Heat.. ;)

[randomman84]

ya dont prime the pad the pad needs to be dry for the polish to break down. Hint: Friction and Heat.. ;)

[imported_Keggus]

Thanks for the quick replies I will try without the QD and see how I go. :bigups