Tanat198
07-08-2005, 10:41 AM
1Z PP with MEGs polishing pad tends to or possible leave micro marrings behind. Will a MEG soft pad with P21 GEPC remove completely them or fill them in?
Accumulator
07-08-2005, 11:02 AM
Depends on how hard the paint is. In my experience the GEPC only cuts *very* soft paint (and only when used with a polishing, not finishing, pad), but it does do a little filling. I follow 1Z PP with 1Z (pro) MP. That`s the progression I`d use if worried about micromarring from the PP. IMO the GEPC is too mild for this, it didn`t even do much on the very soft paint on my Jag.
audipower
07-08-2005, 09:52 PM
Work down on the polishes. I sometimes use SFX-2 and they get them out even on soft clear coats. Man I had a problem with a car I just did. It had a new paint job and if you touched the cc with your finger nail, not pushing, it would scratched. But it got them out and I used SFX-3 to remove the little scratches from "air".