What is the best way of removing clay off clearbra

[jsoto]

There about 3 spots I need to touch up.

I`m thinking Q tips with 3M Tar Remover and then I would give the clearbra some plexus on the areas where I was working on.



Is there a better solution/product I should try ?

[rollman]

Try rubbing the clay back over it and let it pickup into the clay left . Tar remover may be to strong on your clear bra.

[the other pc]

I`ve never had much luck using clay to remove clay smudging. I usually end up using a paint cleaner or bug&tar remover.



If you try bug&tar remover on the clear bra be sure to avoid the edges. You don`t want any of it to come in contact with the bra`s adhesive (especially the 3M (http://products3.3m.com/catalog/us/en001/auto_marine_aero/automotive_aftermarket/node_GS9BRY68DHgs/root_GST1T4S9TCgv/vroot_GSLPLPKL4Xge/bgel_F8WW9DXHQQbl/gvel_RMT00NZ63Rgl/theme_us_aad_3_0/command_AbcPageHandler/output_html), which is an Adhesive, Tar & Wax Remover).





PC.

[stevet]

AIO or VM or similar paint cleaner will clean it righ up.