need more bite ?

[hd-nut]

I have a pearl white i30 that I will be detailing
this spring. Paint is in good shape with minor scratches
on surface. My question is willI need a product with a
little more bite than AIO? If so what would you advise
me to use? Megs #80, 3M perfect it-2 Or pb-ssr1. No swirls to get out.
I am just looking to do the best Prep Possible before AIO. Planning on going with

clay magic, AIO ,UPP, possible Pinn Sign topper
or
clay magic, PPC, Pinn Signature topper

[OI812]

How deep are your minor scratches? IMO I would add the SSR1 into the process.

[hd-nut]

not to deep, looks like a frisbee slid across the surface

[Hawaiianelement]

SSR1 and 2.5 are always great to have on hand. Sounds like you should try 1 first w/polishing pad. Then try cutting if not satisfied. If that doesn`t work go w/2.5.

I`m assuming this work will be done w/a PC..

Aloha

[Luv-N-It]

I would use SSR1 w/a light cutting pad. It should do fine removing the light scratches and giving a great prep for your next step. IF SSR1 does not satisfy the removing of your "frisbee" marks, I am certain from my personal experience that SSR2.5 w/a light cutting pad will get the job done. :)

[andriver]

Agree with Luvnit. Start with the least abrassive and work your way up.

[jvn]

Megs #80 sounds perfect for this and should be sufficient. If the smudge or scratch seems to be too tough to get out, then use 3mPI III-RC with a cutting pad first followed by 80 with a polishing pad.