View Full Version : Bad Scratches Please Help
BigDs2002v6
06-14-2005, 08:57 AM
I am putting my car up for sale and I was taking out my stereo system and on the trunk I had a magnitized XM radio Antenna on the back. Well I took it off and there are some bad scratches all around the magnet. I am new and have yet to buy anything to start detailing so what can I use to make that area look better. I have Megs Scratch X and some 3m swirl Remover at home. But i do not have a polisher yet :( So what can i do..
Thank you so much,
White95Max
06-14-2005, 09:02 AM
ScratchX by hand might be able to remove the scratches. If they are really deep, you may be stuck with touchup painting.
Tasty
06-14-2005, 09:05 AM
I would follow the directions on the Scratch X container, and just do that by hand. It sounds like you have them just in a small area so that should work. Scratch X is made for use by hand.
BigDs2002v6
06-14-2005, 01:45 PM
Thank you guys, that really did help alot! Another Question? When i get my PC and apply product like ssr`s or AIO, do i wipe it off with a mf towel or use a different kind of pad on the PC?? And which Pads should i use for ssr`s, aio, and nattys?
White95Max
06-14-2005, 01:50 PM
Wipe of the product with a MF towel, yes. You can get MF buffing bonnets if you wish, which will replace the need for a MF towel to remove the product.
Pads for the SSRs:
I use yellow or orange for use with SSR3 and SSR2.5, sometimes green for 2.5.
For SSR2, I generally use green.
I don`t have SSR1, but I`d use a blue pad.
For AIO, I use green or blue pads. For bad oxidation I`ve used AIO with a yellow pad.
For Nattys, use a gray finishing pad or apply it by hand.
BTW these colors all refer to Propel pads.
BigDs2002v6
06-14-2005, 01:52 PM
which pads are those? Sonus? Megs?
White95Max
06-14-2005, 01:57 PM
Originally posted by White95Max
BTW these colors all refer to Propel pads.
^^^^
Wasatch
06-14-2005, 01:57 PM
Those pads are from ExcelDetail. 1z UPP would be good by hand on those scratches.
BigDs2002v6
06-14-2005, 02:01 PM
oh im sorry i did not know those were the names of them.. i apologize.
Thanks alot for your help!
White95Max
06-14-2005, 02:03 PM
http://www.prestostore.com/cgi-bin/store.pl?ref=exceldetail&ct=29307