PDA

View Full Version : Zaino Z2 Pro



imported_pdsterns
04-30-2005, 07:17 PM
Picked up a bottle of Z2 pro today in Howell at Shore Motorsports and I was surprised to see the recommendation about using ZFX accelerator with it. "For optimum performance use in conjunction with ZFX accelerator additive". I have some on the shelf but I thought I read, on this board, that it was no longer necessary with the pro.

ZaneO
04-30-2005, 07:22 PM
Nope, ZFX always has been and still is necessary for proper use.

Glossmaster
04-30-2005, 07:28 PM
ZFX is a must, in my opinion.

s2skimon
04-30-2005, 07:59 PM
zfx for first time use.. after that I never use it.. straight outta the bottle i go

imported_pdsterns
04-30-2005, 08:14 PM
Okay, help me out here. The car is in great shape with 2 coats of Z2 with ZFX. I bought the Z2 pro and Z8, should I put a coat of Z2 pro with ZFX and then Z8 or just go with the Z8 for the time being?

s2skimon
04-30-2005, 08:53 PM
z2 pro is the sealant

z8 is the enhancer QD



for the first coat zfx drops with z2 pro



I go with one layer of z2 pro , then wait about 12 to 24 hours for subsequent coats .. and z8 on top after each layer



I`ve got 4 layers of z2 pro now and will probably have a lot more by summer`s end..



i find the z2 pro "needs" to be layered up to 3 coats to fully see the depth..



hope that helps..

FN New Guy
04-30-2005, 08:53 PM
Z8 goes over Z2, I`m not sure Z8 would work well without Z2

Glossmaster
04-30-2005, 09:05 PM
You`ll have no problems with the Z8 over Z2, Z2 Pro, Z5. The Z8 is an incredible product, IMO.

dogma
04-30-2005, 09:58 PM
Originally posted by ZaneO

Nope, ZFX always has been and still is necessary for proper use.



Yup !

HCF
05-02-2005, 12:45 PM
I use z6 or z8 between coats of Z2 an Z5 and finish off with z6 or z8.

imported_memnuts
05-02-2005, 04:14 PM
If you already have established coats of Z2 on the vehicle, technically you are not required to use ZFX to apply a coat of Z2-PRO on top unless you are planning to apply more than one coat of the Z2-PRO on the same day.



ZFX is only required for:

intial coat of sealant and not using Z1

multiple coats in 1 day

expect rain within 24 hrs

imported_pdsterns
05-02-2005, 05:35 PM
Originally posted by blkZ28Conv

If you already have established coats of Z2 on the vehicle, technically you are not required to use ZFX to apply a coat of Z2-PRO on top unless you are planning to apply more than one coat of the Z2-PRO on the same day.



Now that`s the answer I was looking for !!!!!

ZaneO
05-02-2005, 09:47 PM
I wasn`t aware originally that you already had Zaino on the car.