Which Products to use on Lemans Metallic BMW?

[imported_plazaman]

What products should i use for this paint?





Im thinking the AIO+SG+Souvern



I think the souveran will attract alot of dust, so im also considersing p21s and NXT paste



What do you think about this combo?



Im trying to achieve the shine below

[NEW AGAIN]

AIO + EX-p top with Natty

Meg GC top with #26

[imported_plazaman]

"Meg GC top with #26"



would that mean AIO + Meg GC top with #26



Any what is that? I see #26 is some kind if yellow wax. what is GC?

[White95Max]

GC= Gold Class is a consumer-level wax (with light cleaners) available at local stores.



I would try AIO + UPP + Nattys

[imported_plazaman]

im reading that SG might be a pain to apply and can cause slight hazing.



is souveran bad to top with?

[Lowejackson]

For SG hazing, do a search on WOWO

[Steve530]

Like Lowejackson wrote, use the WOWO method for the SG and you`ll have no problems. Use at least 3 layers of SG - 4 or 5 wouldn`t hurt. Then top with a good carnuba.



You`ll like the shine.

[shelshel]

SG is a pain and that`s why I`ve switched to UPP. You`ll be amazed at the results. I like it alot better than SG. I still use AIO as a base.

[JJ_]

AIO + EX-P + Nattys



VM + EX-P + nattys



I can see its very glossy, but not a lot of depth and very reflective, I think VM + EX-P + nattys would look the most wet/reflective. I find EX to make my darkish blue car look nice and wet but not very reflective more depth.

[l33]

2 x fmj

[imported_plazaman]

AIO + EX-P + Nattys im leaning towards this combo now



does any of these can be layered or a single would be ok?

[White95Max]

You can layer EX-P and/or Nattys.

I have Nattys x3 on my car now.

[imported_plazaman]

how long is the cure time between layers?



Is this final? AIO + EX-P + Nattys will give my my killer look (look above)

[imported_plazaman]

anyone else? Will this be a killer combo?

[NEW AGAIN]

check your pm