VM by hand or PC??

[Beason]

Im currently working on my black tahoe and about to start using VM for the first time, I was wondering if I should do it by hand or with a polishing pad on a PC? Which gives the best results. This thing is looking great. Clay, SSR2.5, SSR1, so far and VM and #16 to finish it off, should look nice.

[RCBuddha]

I`ve used VM via the PC and a polishing pad with pretty good success, but due to its thinner consitency, I think hand application may be less wasteful.

[Eliot Ness]

I`ve used VM by PC with both a polishing pad (Meg`s 8006) and a finish pad (Meg`s 9006) with very good results. VM is great, you`ll love it!

[dschribs]

http://autopia.org/forums/showthread.php?s=&threadid=52671

[benpocock]

Originally posted by RCBuddha

I`ve used VM via the PC and a polishing pad with pretty good success, but due to its thinner consitency, I think hand application may be less wasteful.

Agreed. I used it on a DAS blue pad and seemed to use so much just for one car. Next time I`ll try by hand as I don`t use the polishing effect of VM, just the glaze side of it.



Ben

[Beason]

Well i tried hand first and i was putting on to thick so I went to finishing pad and did awesome.

[mtwedt]

I`ve tried VM with the PC/Sonus blue finishing pad and also by hand with foam applicator. I definatley prefer the by hand method because it is so thin. I think there is much less product waste by hand and I felt the results were equal with both methods

[Lowejackson]

I had success both by PC and hand

[Scottwax]

Originally posted by Lowejackson

I had success both by PC and hand



Same here. I prefer to use a PC for more consistant polishing though.

[thestingrayboys]

Sorry all, as I am new to the site I am not yet up to speed on some of the abreviations. What is VM? I am scratching my head!!

[Soarer V]

thestingrayboys Sorry all, as I am new to the site I am not yet up to speed on some of the abreviations. What is VM? I am scratching my head!!



Vanilla Moose