PDA

View Full Version : good portable halogen light???



Pages : [1] 2

HotRodGuy
11-08-2004, 04:33 PM
what do you guys think of this, it`s not very portable but I could deal w/ it



http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&pid=03473921000





is 500 watts enough? Anyone got a good idea for something maybe smaller?

kompressornsc
11-08-2004, 05:45 PM
I just got the double head Regent one (it`s blue & grey) from Lowe`s this weekend. Used it in the garage a few nights ago & it was better than most sunlight. Each head has 2 bulbs-a 250 & a 500. So you can go anywhere from 250w to 1500w total. Pretty well made-not as stable as I would like, but not bad.



If you want something more portable, look for a cage light-the open tripod ones are a b***h to haul around.



And I`d go bigger than 500w. `Cause when the going gets wierd, the wierd turn Pro`.

HotRodGuy
11-08-2004, 05:51 PM
Originally posted by kompressornsc

`Cause when the going gets wierd, the wierd turn Pro`.





;)





got a link to a caged light?

Bill D
11-08-2004, 05:52 PM
You could get a 1000 watt twin set someplace like Home Depot between $20 and $30

kompressornsc
11-08-2004, 06:28 PM
Here`s a cage light-the heads fold down into the cage so they don`t bang around when you have to move it or throw it in your trunk. Ace probably isn`t the best place to buy something like this, but it will give you an idea of what`s available.



cage light (http://www.acehardware.com/product/index.jsp?productId=1780088&cp=1255483..1254879.1254967.1259212&parentPage=family)

jimmybuffit
11-08-2004, 06:30 PM
I`m a big believer in halogens, I even use them outside, in direct sunlight.



My belief is that the light should always be 90 egrees to your eye, i.e. 45 degrees into the surface, and 45 degrees back to you.



For a source: http://www.e-conolight.com/Product/EProductDetail.asp?ProductFamilyID=1&FGNumber=E-WL7Q99AY . *Much* better quality than I`ve seen at Lowe`s, and Home Depot, and pretty good pricing. Check out their price on replacement bulbs (you`re gonna need `em!).



Jim

HotRodGuy
11-08-2004, 06:56 PM
Thanks Jimmy, I ordered their E-WLHQ50BY - Worklight, 500-watt T-3 lamp included



http://www.e-conolight.com/Product/EProductDetail.asp?ProductFamilyID=1&FGNumber=E-WLHQ50BY



I couldn`t afford the double 1,000 watt one you pointed out right now and figured this one should do me a good job since i`m just a weekender still learning.





If it doesn`t work out, it doesn`t work out. I think it will though :)

I figure 500 watts is probably better then sunlight.

Bill D
11-08-2004, 06:59 PM
Thta`s a nice site and that 500 watt one would be a great stand alone light as well as an addition to the 1000watt set :up

HotRodGuy
11-08-2004, 07:00 PM
Plus, I need something I can use out by the bbq, so if this doesn`t work :)

jimmybuffit
11-08-2004, 07:26 PM
LOL, makes a nice foodwarmer!



The two 500 watt lights may seem like overkill (and it usually is), but try doing a driver`s door, and seeing the reflection from both the top and bottom



Seriously, if you`re using two in an unheatd garage this winter, you will feel the difference in comfort.



Jim

HotRodGuy
11-08-2004, 07:48 PM
what`s winter? It`s 65-75 degrees all year round :P







thanks for the link!





btw, our Jimmy concert was rained out last month :(

Mr. Clean
11-08-2004, 08:00 PM
Originally posted by Jimmy Buffit

*Much* better quality than I`ve seen at Lowe`s, and Home Depot, and pretty good pricing.



Can you eloborate? Better how? Pricing is fair, but then you add $10 S&H and it makes it just OK, BUT if I`m paying for *more* quality :)

jimmybuffit
11-08-2004, 08:23 PM
I figure 500 watts is probably better then sunlight.



HRG: Nope. I did a black Mazda RX8 (2500 miles) today with horrible swirling.



I felt the only way to do it was outside in the full sunlight.



I used a very heavy cutter(Malco`s TruGrit)/rotary/wool pad . Then Meg`s DACP/rotary/Meg`s yellow foam. Then Menzerna F2/PC/finish. Many panels were finished with 3M SMR/PC/finish.



Review/Redo some...



Klasse Twins...



really a very nice ride.



(I had to bill three people; a body shop, an insurance co, and the owner, for a total of just $240./



Jim

Bill D
11-08-2004, 08:26 PM
Do be careful using two and probably one as well, if you position the light a little too close, you might get some steaming QD :o He he, learned my lesson so now I often repostion to halogen set severla times during a polishing session. Not exactly quick and easy but worth it :D

BookemDano
11-08-2004, 09:29 PM
I a similar light with dual heads and one 500W bulb per head. I also have a two smaller hand-held work lights with 300W and 500/750W. I believe that you can never have too much light.



One trick that I use for the sides of the car is to point the light at the floor and then look at the light reflection in the paint.



And yes, they can heat up your paint. That can be a good thing if your are trying to touch up the paint on a cool evening.



Regards,



Dan.