PDA

View Full Version : used PB`s SSR1, SSR2, and EX-P for the first time



vdog0531
10-19-2004, 02:58 PM
well as the title says, i just used my Poorboy`s products for the time today. i have to say, i really liked the way they worked. The SSR2 i used with a light cub pad and my makita 9227 and it cleaned up this dark blue 4 runner extremely well. I follwed that with some SSR1 and my PC with a polishing pad. then i slapped on some EX-P by hand. All the products worked smoothly with no problems for me. I also liked how far the SSR1 would go. just a little dab and i could do almost a whole fender with my PC. The EX-P troubled me at first because i am used to SG and it seems as though you must use a little more of the EX-P to get it to go as far, but once i figured out how much to use, it went on a smoothly and came off even easier. After using Poorboy`s for the first time, it looks as though my DACP will be getting replaced with some SSR2.5 and some SSR3. judging by how easy the SSR1 and 2 were to use, why bother with DACP. for reference, i used these products with my rotary buffer and the Edge light cut green pad and then SSR1 with my PC with the meg`s polishing pad. the ex-p was done by hand.



Vernon



PS. it was a semi sunny/overcast day. i`m excited to use in the sun to see if they really do work well in the sun like it says:)

Rob Tomlin
10-19-2004, 06:34 PM
I have been very happy with SSR 2.5, 2, and 1. Great, easy to use products, that give very good results.

Nicky Pass
10-20-2004, 11:19 AM
Any pics???

Eliot Ness
10-20-2004, 11:21 AM
Originally posted by Nicky Pass

Any pics???

I just saw them in Clink & Brag:

http://www.autopia.org/forums/showthread.php?s=&threadid=45531

vdog0531
10-20-2004, 11:54 AM
thanks Eliot Ness for putting up the link:)



Vernon

Eliot Ness
10-20-2004, 12:03 PM
Originally posted by vdog0531

thanks Eliot Ness for putting up the link.....

No problem, the SSR use caught my eye. I`m thinking of trying some of the SSR`s for use in the sun. Thanks for your review and pics :xyxthumbs

DSVWGLI
10-31-2004, 11:25 PM
Question on abrasivness of PB SSR line of polishes. How would they compare to DACP and 1Z UPP and 1Z PP?

vdog0531
11-01-2004, 12:11 PM
i havn`t used or know anything about the last couple but SSR 2.5 is comparable to DACP. i didn`t get the 2.5 because i already have DACP but once i run out, i plan on buying the 2.5.



Vernon