Who makes the best swirl remover?

[imported_agentf1]

I have been mostly using 3m ssr 39009 and for the tougher swirls I use 3m 05930 PI Trizact or 3m 39002 or #83 DACP. I also have Griots machine polish 1, 2 and 3. No matter what I use and even when finishing up with a finishing pad the surface seems to have a slight haze (on black) when I am done, you cannot tell in direct sunlight. Maybe it is just because I no longer have 10 coats of zaino on it anymore but I am looking for something that will give me a crystal clear finish when I am done buffing. I use both LC and Meguiars pads.



What does everbody here use?



I have been thinking about trying PB SSR 2.5 and PB SSR 1, thoughts



I have also been hearing about Menzerna and Einzett, what are the pros and cons of the products I mentioned?



I will be using them on a 02 Black Z06 and an 01 MB c320 mostly if that makes a difference, the vette seems to have super hard paint that is a b!tch to polish. Thanks.

[ZaneO]

I have had good luck with Menzerna on black Vettes.

[s2skimon]

Poorboy`s SSR series gets my vote



former user of DACP & 3M SMR

[imported_agentf1]

Wow, 71 views and only 2 replies. :nixweiss Has anybody tried the 3M 5930 Trizact? I love it but don`t hear much about it on any of the detailing forums. :confused:

[Bill D]

The 3m PI III RC and MG are popular products here. They give nice results byPC or rotary :up

[mtodde]

For swirl removal I am very partial to Poorboy`s. I really like SSR 2.5 a lot and use SSR 1 as a polish regularly...it will also remove a lot of light swirls.



In my limited experience (I`m a hobbyist, not a pro), the Poorboy`s products are not as good on sratches as they are on swirls...that being said they will make most scratches look a lot better. I guess it would be considered a scratch remover if it was better on scratches, :p

[eShine]

Poorboys

[ALAN81]

Poorboys 2.5 real good stuff

[RedondoV6]

Menzerna or 3M PI-III RC and MG.



At the moment I am using mostly Menzerna but I have some PB`s on order to try it out.

[MongooseGA]

wil the PI III MG remove swirls? i wouldnt think so as it is only a glaze. i have a little bit, but dont know what its best used for. what other polishes is it comparable to?

[Eliot Ness]

Originally posted by MongooseGA

wil the PI III MG remove swirls? i wouldnt think so as it is only a glaze. i have a little bit, but dont know what its best used for. what other polishes is it comparable to?



It`s rated about where Megs #80, SSR1 and 1Z mp are (#4). It will remove minor stuff, but for anything more noticeable you should use PI III RC first. Both are good products and compliment each other nicely.

[MongooseGA]

Originally posted by Eliot Ness

It`s rated about where Megs #80, SSR1 and 1Z mp are (#4). It will remove minor stuff, but for anything more noticeable you should use PI III RC first. Both are good products and compliment each other nicely.

thanks. what would have a better effect underneath of S100? SSR1 or the PI III MG?

[Sveta]

I had better results using IP and FP on black paint,(Imron, I think), then DACP and #9.

[Bill D]

Originally posted by MongooseGA

wil the PI III MG remove swirls? i wouldnt think so as it is only a glaze. i have a little bit, but dont know what its best used for. what other polishes is it comparable to?



It`s named improperly. There are no fillers in this product.

[MongooseGA]

i see. thanks bill. :xyxthumbs