View Full Version : New Product Trial SSR2, Pwc, Nattys
TN9thSi
08-24-2004, 02:02 PM
Here`s a shot of my trunk lid with the clouds reflecting nicely.
I only had time to do the one area, but so far I like this combo. I have some EX-P and Pro Polish to try out next.
Wash
Clay
SSR2 w/ Sonus Green pad
Pwc w/ Sonus Blue pad
Nattys paste by hand
http://www.autopia.org/gallery/data/500/13446clouds.jpg
I was pleased with the results, but was expecting more depth. Any recomendations of how to get a deeper, wetter look?
CobraCraig
08-24-2004, 02:16 PM
Looks good. There is plenty of depth there.
mtodde
08-24-2004, 02:28 PM
That`s looking awful good!
stilez
08-24-2004, 02:30 PM
Originally posted by CobraCraig
Looks good. There is plenty of depth there.
Agreed!
I have found Natty`s to help that aspect verrrrry much.
imported_series1
08-24-2004, 02:33 PM
Nice Clear look to it. I like that for blue colors.
TN9thSi
08-24-2004, 02:37 PM
Thanks for the compliments. It`s been raining, but if it stops this afternoon, I plan to do the hood and use EX-P and either Nattys or #16.
Should I be using something between the SSR2 and PwC/EX-P? The finish didn`t look dull at all after SSR2 so I went straight to PwC.
Antonio Wright
08-24-2004, 04:03 PM
If the finish does not look dull after you use SSR2 or 2.5 then there is no need for a finer polish. Go straight your LSP.
How do you like the sonus pads?
TN9thSi
08-24-2004, 06:00 PM
Well, I just finished claying and applying SSR2 to the roof. I did the front fender with SSR2, Poorboys Professional Polish, and topped it with #16. It looks really nice. Too dark for any good pics.I`ll post a few later.
On the Sonus Pads: I like them a lot! The green pad is agressive enough for light swirl removal and the blue is great for 2nd step polishes. They are MUCH better than the ones I got with my PC package from DP several months ago. The thing I like about the Sonus pads is that the velcro backing extends past the backing plate. I don`t see any way for the edge of the backing plate to cut into the foam! :up
03COBRA
08-24-2004, 11:56 PM
If I could make one suggestion. I would put a coat of EX-P after the PwC before the Natty`s! I love EX-P before the topper! Anyway`s, what kind of car is that? Great Job!!!!!
du3ce
08-25-2004, 12:09 AM
nice, any more pics???
TN9thSi
08-25-2004, 07:58 AM
That`s all the pics I have. I only had time to do the trunk lid and the left front fender. Also used SSR2 on the roof. I`ll finish it up next week and have some more pics, weather permitting.
BTW- The car is a 2003 Mazda 6i. Here`s an old pic, not "detailed"
http://www.autopia.org/gallery/data/500/13446side.jpg