Megs combo

[toneyk]

tried to lay megs #7 scg on top of megs #80 MSG

Went on ok, but we i went to buff it off it knapped up and left the surface lookin like:scared

Had to reapply the megs #80 to clean up the mess, what gives i thought you could lay #7 on #80 :confused:

Products applied with lil orbital they should work by hand so the orbital should be ok

The end result was :cool: after the wolfgang sealant x2 was applied

But was hoping to use #80, #7, wg combo so what gives:confused:



thnx Karl

[thinksnow]

#7 is essentially a ton of oils. Therefore, application and removal is tricky until you get the hang of it.



The WG twins would negate any effects of #7--the Pre-Wax Cleaner (or whatever it`s called) would remove the #7, and the WG sealant would not adhere to the oils in #7.



If you are going to use #80-->#7, follow with #26 or #16 paste wax. Apply #7, remove most of it with a terrycloth towel, apply wax, remove wax with mf towel. Voila.

[toneyk]

I have used #7 by its self no problem, but it would not lay on the 80:confused:

I have used Wg sealant on#7 no problem

just could not get the #7 to lay on #80



Karl