PDA

View Full Version : anodized wheels: how to remove these spots?



kepani
07-04-2004, 06:43 PM
i have a set of anodized volk te-37`s. when i took my car to a dealer, they accidentally used some sort of harsh chemical on the rims (not sure what it was) that "tarnished" the finish.



does anyone have a definitive way of getting the finish back to normal? see pictures below.



http://www.pbase.com/image/30929578.jpg

face of spoke has a white hard residue



http://www.pbase.com/image/30929579.jpg

notice spots on sides of spoke - they don`t rub off



http://www.pbase.com/image/30929580.jpg

lip of rim has a "lathed" surface - white residue again



http://www.pbase.com/image/30929581.jpg

another spot near lug nut



http://www.pbase.com/image/30929582.jpg

more spots near lug nut



i`ve tried a 1:1 (simplegreen:water) solution; sprayed on dry and let soak for a few mins. however, the residue is still stubborn.



any ideas would be GREATLY appreciated. i`ve been trying to deal with these stains for several months and still can`t seem to find a way to get rid of them.



thanks in advance.



kepani

nonameo
07-04-2004, 07:09 PM
Are they clearcoated? have you tried some metal polish?



edit: actually, since the dealer messed them up, make THEM pay for it. as I recall, those rims would be EXPENSIVE to replace.

kepani
07-04-2004, 08:42 PM
Originally posted by nonameo

Are they clearcoated? have you tried some metal polish?



edit: actually, since the dealer messed them up, make THEM pay for it. as I recall, those rims would be EXPENSIVE to replace.



they are not clearcoated. bare metal. but they have that "rough" anodized finish. i have heard to try metal polish, but wanna try something less severe if it is possible.



any tips on applying the polish?





the dealer won`t fix them. :( i already fought... :mad:

forrest@mothers
07-05-2004, 11:05 AM
I would NOT use metal polish - it will remove the anodizing.



I believe you are SOL. I have yet to find anything to fix marring of an anodized finish.

HotRodGuy
07-05-2004, 11:30 AM
try a claybar maybe

HotRodGuy
07-05-2004, 11:31 AM
ps, I still don`t understand why they don`t clear coat their wheels. I`ve seen some volks in real bad shape after a few years

Logik
07-05-2004, 12:21 PM
kepani:



I know this is a complete derailment of the thread, but I have to ask... do you have your original ITR wheels? Mine are pretty scuffed up, and I might get them re-powdercoated. However, I`d also like a set of wheels for the track, so if you have some mint condition ITR wheels then I could use my old ones for the track.



Let me know if you have the originals, and sorry for the derailment-- I really don`t know what would help your situation.

Jesstzn
07-05-2004, 12:22 PM
Kepani if forrest can`t help you ..I`d suggest that the place that marred them should rectify the problem.. why should you suffer accident or not. The tire dealer accidently marred one of my wheels .. he acknowledged it and replaced it.

kepani
07-10-2004, 10:48 AM
Originally posted by Logik

kepani:



I know this is a complete derailment of the thread, but I have to ask... do you have your original ITR wheels? Mine are pretty scuffed up, and I might get them re-powdercoated. However, I`d also like a set of wheels for the track, so if you have some mint condition ITR wheels then I could use my old ones for the track.



Let me know if you have the originals, and sorry for the derailment-- I really don`t know what would help your situation.

logik - sorry, but i`m planning on keeping mine. ;) but thanks for the inquiry. :)





i stand corrected as far as the clearcoating. from another web forum, i was able to find out that these rims are actually clearcoated. it sounds as though the clearcoat was damaged. i`m going to try some 3m imperial hand glaze and see if it helps. hopefully the clearcoat can be "replenished". :(



thanks for the precaution forrest! won`t do it.



as for the dealer issue, i`ll have to try once again. :mad:



kepani

Rlockyer
07-10-2004, 06:39 PM
Originally posted by kepani

the dealer won`t fix them. :( i already fought.

Take `em to court.

ncal
07-10-2004, 06:43 PM
The problem is you`d most likely need to have clear proof that they weren`t messed up prior to getting serviced and/or an admission of guilt from the dealer : (