Does this sound like a right process?

[! apmljv]

Wash

Clay

3M SMR x2 (x2 if necessary)

AIO

SGx3 (24 hrs in between each layer)

P21S



?



Thanks

[! apmljv]

Anybody? :(

[imported_series1]

Yeah it looks good to me. Good Luck!

[vinnymack]

sounds like a killer combo, post the results!

[andriver]

Good combo. Looks right to me.

[mnbv]

Jliao: Don`t forget another wash after claying.

I have basically the same question, so I`ll piggyback this thead. (hope no one minds, if so I can delete this) Be sure to say who you are talking to though!

My process is for a fairly swirled+a few scraches Milano red paint. I will be posting pictures very soon. Everything is by hand, No PC yet.



Wash, Clay, Wash, DACP, SFP, S100 SECP, EX-P (possibly 2x), S100 wax (possibly 2x). How long should I wait in between layers? Any tips on applying by hand?

[Rlockyer]

Originally posted by mnbv

Wash, Clay, Wash, DACP, SFP, S100 SECP, EX-P (possibly 2x), S100 wax (possibly 2x). How long should I wait in between layers? Any tips on applying by hand?

Your sealant layers can go on right after your initial prep.

After that, you want 24 hours between any layers from the sealant through the wax topper.



IMHO, for claying, just use Meguires QD spray as a lubricant and dispense with the post-clay wash.

Likewise, for my 24-hour later layers, since my cars live outside, I`ll simply QD after a run with the CCD rather than wash the thing every day for a week.

[mnbv]

I have the Clay Magic kit(contains lube), I still need a good QD. I could get it locally, so I guess it was kind of an impulse buy. :) I`ll wash between each untill I get a QD. I don`t mind washing every day for a week anyway. :)

So is this a good process and products? It seems like everyone uses VM over S100 SECP.

[Rlockyer]

Originally posted by mnbv

So is this a good process and products? It seems like everyone uses VM over S100 SECP.

I can`t comment on those particular products, as I`ve only worked with the Blackfire system (twice) and AIO + SG + P21s.

Between the two, I prefer the Klasse twins over Blackfire... much easier to work with.

[scottabir]

If my memory serves me correctly the 3m SMR products fill in more swirls than remove them. If this is the case the AIO is going to remove the oils from your paint and basically you will be left with wasted time of applying two coats of the SMR. *I* would use a polish that removes more of the marring rather than fill it if I wam going to go the Klasse route.

This is just my $.02

[! apmljv]

I clay as I wash the car, then wash the car all over again afterwards to remove any dried water spots.



scottabir, what polish would you recommend? Meguiar #80? or DACP?

[shaf]

If you are not sure how strong a product you need, you can always try the SMR. I disagree that it fills more than anything else, but it IS very mild. Try that first and then step up to something stronger (like DACP) if needed. You might still need the SMR to clean up any hazing caused by the stronger product, so I would have it on hand regardless.



Try things on small sections first, and check your work as you go and after each step. You don`t want to do a whole car and then find out that maybe you should have done things differently. I`m assuming you have swirls or some other problem you have to remove, but you haven`t said, and in any case, it is always an in-person judgement call.

[scottabir]

*I* personally have not had much luck with the 3M SMR (for dark cars bottle). Why not try to use the SMR on half the hood and then add your AIO and see the results, maybe it does remove more than it fills.

I agree with 4DSC in regards to having to see the problem before telling you to get XYZ brand polish. If you can snap a pic it would help out a lot.

[! apmljv]

Alright, I`ll try and snap a pic later on today and post them.



Thanks

[mnbv]

^same here^, busy 4th for me.