Before and after, looking for comments...

[ResidualFreedom]

Hey just a couple before and afters of a friends "Freshly Detailed TL" , If you look you can see my dinner in the third pic, PIZZA PIZZA, Ummm, lol.



http://www.acurainspired.com/gallery/data/a3fb4fbf9a6f9cf09166aa9c20cbc1ad/full_1243_p28700.jpg http://www.acurainspired.com/gallery/data/a3fb4fbf9a6f9cf09166aa9c20cbc1ad/full_1243_p28701.jpg



http://www.acurainspired.com/gallery/data/a3fb4fbf9a6f9cf09166aa9c20cbc1ad/full_1243_p28702.jpg





Just a little TLC and the right products and Voila.... :D



Used DACP with the PorterCable, and followed with a little AIO.. turned out really nice IMO.. The green turns black in certian light, looks crazy!!



ok here`s one of that funky paint..



http://www.acurainspired.com/gallery/data/a3fb4fbf9a6f9cf09166aa9c20cbc1ad/full_1243_p28703.jpg



Iam in not way a professional, but I do think it turens out rather nicely. Please post comments, I should have put a coat of SG afterwards but time wouldn`t allow, the AIO will have to do...

[mnbv]

what are those white specks?

[andriver]

Nice job on the swirls.

[ResidualFreedom]

Originally posted by mnbv

what are those white specks?



a few were stone chips, but the majority were dust and buffed wax, the car had a ton of static on it after, it constantly pulled these white specs back on to the finish..



Would you reccomend a Quick Detail over the car after??



The car was a friend who just wanted to get the swirls out, no dressing of the tires, windows, or inside..



Just someone that doesn`t have the access to the PC and wanted me to give it a quick "once over".

[sQuashed]

Good job on the swirls !!

[JasonD]

Very good job, but next time you might want to think about a follow-up polish for the DACP, since it`s pretty aggressive. Your end result looks great, but it might have even turned out better with a finer polish, IMO.

[mnbv]

what do you mean by finer, less agressive? I will be using DACP and SFP (after clay) and then SECP after that etc etc.

[ResidualFreedom]

http://www.acurainspired.com/gallery/data/a3fb4fbf9a6f9cf09166aa9c20cbc1ad/full_1243_p28708.jpg

http://www.acurainspired.com/gallery/data/a3fb4fbf9a6f9cf09166aa9c20cbc1ad/full_1243_p28709.jpg



just a few more..



Sounds bad to say but, if this was a full exterior detail I would have used the DACP, then the SFP, then AIO, the SG. With a possible option of removing the SFP or the AIO. I am getting a little supply of Wolfgang today and I have some P21S as well, so I will be able to play with some combinations.



This was for a friend who said "I don`t want you to clay, I can do that, I just want some of the swirls out because I can`t do it by hand.. " She takes care of her car, just doesn`t have the access to the PC.