View Full Version : Can you have too many products on the paint?
03COBRA
07-01-2004, 10:26 AM
Well I was thinking of using SSR 2.5 to remove the swirls! But then I was thinking of using Poorboy`s polish,VM,EX-P, and top it with Natty`s!! Will this create a dull finish by just having too many products on the paint, or will it work good? Or am I just canceling out product by using Polish then VM? Thanks
UtahX
07-01-2004, 10:48 AM
I would go with SSR2.5/VM/EX-P/Natty`s.
imported_memnuts
07-01-2004, 11:07 AM
Monitor each step and correct any visual abnormailies as they occur.
Your proposed line-up should not create any problems.
I would allow the EX-P to at least cure 24 hrs before topping with Natty`s Wax. :xyxthumbs
QD before topping EX-P right?
imported_memnuts
07-01-2004, 05:19 PM
Using of a QD non-carnuaba/silicone based like FI, QS, Z6, WG, UPP, BF, LF (Lackfinish) or Sonus would not hurt anything and I personally like using such products (my Zaino roots) prior to adding the protectant.
:wavey
imported_Intel486
07-01-2004, 05:45 PM
That line-up looks good and don`t think it`ll cause any problems.
Be sure to let us know how it turns out!