Which PC pads should I use with this system?

[djmn]

Just got my PC and was wondering which pads to use with the following steps:

Step 1) Klasse AIO

2) Klasse SG

3) Klasse SG

4) S100

5) S100



Should the AIO be applied with a polishing pad or the finishing pad?

I was going to apply the SG by hand with the BillNorth method, I assume I need to let it cure 24hours before applying the second coat of SG?

Can I appy the S100 with a finishing pad? Again, I assume I should let it cure 24 hours before my second application of S100?

Thanks

[djmn]

oh, one more thing....What speed should I be setting it at for the AIO and S100?

[Accumulator]

Anything you can do by hand you can do with a PC, though many people prefer to apply their SG and p21S/S100 by hand.



Yes, 24 hours between coats of SG and S100. It`s debatable whether the second coat of S100 will "layer", but there`s no real reason NOT to do it.



I use a polishing pad with AIO, at speed 4-5. Some people prefer a finishing pad, but I`d only do that if the surface is already fully prepped with polishes, etc.



For applying LSPs like SG and waxes, I run the PC at 4-4.5 and use a finishing pad.

[s2skimon]

I use my white pad for AIO



I use a dedicated grey or black pad for SG



I use a dedicated orange pad for prelimary DACP work



the s100 topper, I used by hand.. but have stopped topping it as my Klasse finishes is more than fine for me :D