PakShak
06-01-2004, 12:04 AM
Hi All,
Here`s the 2000 white Corolla I had detailed today. The Corolla was really in bad shape. Forget about the swirls, this Corolla was chalky by touch and no gloss what so ever. The results after 7 hours is below. First, here are the steps I took to achieve the Autopia look. :)
1. Car Wash with NXT Car Shampoo.
2. Clayed with ClearKote Clay with Poorboy`s Spray & Wipe
3. Car Wash with NXT Car Shampoo.
4. Removed heavy oxidation with Makita 9227 rotary w/ 8 1/2" white LC CE pad using DACP. The Makita is the bomb! :xyxthumbs It really does save a lot of time.
5. Removed heavy oxidation with PC 7336 w/ 6 1/2" yellow LC pad with DACP for those hard to reach areas where the rotary would not reach.
6. Used PC 7336 w/ 6 1/2" white LC pad with Poorboy`s SSR1 to bring back gloss.
7. Applied 1x AIO by hand.
8. Applied 1x SG by hand.
9. Top it off with Natty`s Paste Wax by hand.
10. Dressed the tires with Poorboy`s BNB and buffed off with yellow foam applicator pad
11. Vacuum interior with Rigid Wet/Dry vac.
12. Cleaned and dressed interior with Poorboy`s Natural Look
Then I called it a day. Damn, I`m exhausted. :D
I could only get the after pics. Because when I first started, it was slightly overcast so the pics wouldn`t have come out the way I wanted.
*Edit*
Seven (7) pics to follow....
Here`s the 2000 white Corolla I had detailed today. The Corolla was really in bad shape. Forget about the swirls, this Corolla was chalky by touch and no gloss what so ever. The results after 7 hours is below. First, here are the steps I took to achieve the Autopia look. :)
1. Car Wash with NXT Car Shampoo.
2. Clayed with ClearKote Clay with Poorboy`s Spray & Wipe
3. Car Wash with NXT Car Shampoo.
4. Removed heavy oxidation with Makita 9227 rotary w/ 8 1/2" white LC CE pad using DACP. The Makita is the bomb! :xyxthumbs It really does save a lot of time.
5. Removed heavy oxidation with PC 7336 w/ 6 1/2" yellow LC pad with DACP for those hard to reach areas where the rotary would not reach.
6. Used PC 7336 w/ 6 1/2" white LC pad with Poorboy`s SSR1 to bring back gloss.
7. Applied 1x AIO by hand.
8. Applied 1x SG by hand.
9. Top it off with Natty`s Paste Wax by hand.
10. Dressed the tires with Poorboy`s BNB and buffed off with yellow foam applicator pad
11. Vacuum interior with Rigid Wet/Dry vac.
12. Cleaned and dressed interior with Poorboy`s Natural Look
Then I called it a day. Damn, I`m exhausted. :D
I could only get the after pics. Because when I first started, it was slightly overcast so the pics wouldn`t have come out the way I wanted.
*Edit*
Seven (7) pics to follow....