Most aggressive product Meg`s offers?

[imported_SouthernZ71]

Just curious, cause I`ve got some problems areas and don`t have a rotary and would like to avoid wet sanding if possible. I`ve tried DACP w/yellow, DACP w/yellow spritz of water and DACP by terry cloth. While these methods have put a dent in them, they haven`t removed everything.





Thanks for the help

[imported_BretFraz]

Their most aggressive is #85 Diamond Cut 2.0. More aggressive than DACP is #84 Compound Power Cleaner, which I`ve used a number of times with a rotary and got excellent results.

[Jngrbrdman]

This is the scale from 1-10 as far as I know.



#85 Diamond Cut = 10

#84 Compound Power Cleaner = 9

#4 Heavy-cut Cleaner = 8

#1 Medium-cut Cleaner = 7

#83 DACP = 6

#2 Fine-cut Cleaner = 5

#80 Speed Glaze = 4

#82 Swirl Free Polish = 3

#9 Swirl Remover 2.0 = 3

#3 Machine Glaze = 1

They don`t list anything at the 2 rating that I know of.

[Mike_Phillips]

I`ll add some more to this thread later, I just finished a Ferarri Detail Day at Meguiar`s and I have to clean up the shop and head home,



Here`s a tidbit...



http://www.meguiarsonline.com/gallery/data/500/2700_FerrariatMeguiar1.jpg



http://www.meguiarsonline.com/gallery/data/500/2700_1967Ferrari1.jpg



Some guy posted the other day ago on Autopia the he thought NXT was junk,



Sure looks good on Ferarris!



Wait till I post some pics...



Mike



p.s.



We have at least one, maybe two other products more aggressive than #85

[imported_SouthernZ71]

Great, any idea where to get #85?

[Mike_Phillips]

You can purchase some #85 at any PBE store.



Just a note, #85 is formulated to be used with a wool pad, while #84 is formulated to work with a foam pad.



If you going to use a foam pad then you should look at purchasing the #84.



Mike

[imported_SouthernZ71]

Originally posted by Mike Phillips

You can purchase some #85 at any PBE store.



Just a note, #85 is formulated to be used with a wool pad, while #84 is formulated to work with a foam pad.



If you going to use a foam pad then you should look at purchasing the #84.



Mike



Thanks for the tip.





How is the hazing level with #84? And is it the same apply/remove method as DACP? Does it have diminishing cutters like DACP or?



Thanks, again, for the help

[topnotchtouch]

Isn`t everything above DACP meant for Rotary only??? In his post he says he does NOT have a rotary. Unless I am mistaken (I don`t think I am) DACP is the most agressive product suggested for use with the PC. Of course I am assuming here that by "yellow" he is referring to a PC pad and not a hand applicator as that is whole different story unless he has arms like Scottwax.



If you are using a PC you could try stepping up the speed on the PC and make sure with DACP you are working it until it begins to dry.