Polish before Zaino

[imported_Unreal]

I was wandering what your favorite polish is to use before Zaino?



I was thinking 1Z MP but was hoping to get some other help as to see what you guys use.

[kg/cm²]

I recently have been using AIO...

[imported_memnuts]

Menzerna IP and FP both silicone, filler and oil free ( water-based ). :xyxthumbs

[imported_Unreal]

Originally posted by blkZ28Conv

Menzerna IP and FP both silicone, filler and oil free ( water-based ). :xyxthumbs



Wich one would you reccomend for very minor swirls?

[imported_memnuts]

I always use both. Sorry can`t answer single usage question. :(

[imported_Terry]

FP has worked for me with minor swirls....:up

[dternst]

I prefer to use one or two of the einszett line of polishes depending upon the degree of the scratches.

[bigpoppa]

Menzerna FP or 3M SMR. Both work very well.

[GoodnClean]

I`d be careful with the 3M SMR has it is NOT filler free. I would think you`d have bonding problems if you didnt dawn wash.



I`d swap 3M`s PI-III-MG for it instead, same type of product but no fillers.

[Jesstzn]

TQB I am in the *process* right now .. FP on a PC will do very minor swirls .. I usually use both before Zaino.



I am actually in an experimintation mode right now .. up here the spring full detail happens a panel a day in 40 Deg weather so I do a panel or 2 then NXT it .. in a week or so I will be done then will apply another NXT to see how I like it. If no .. I will AIO and Zaino or SG it.

[imported_Unreal]

Thanks for the info guys.



Glad you guys posted before I messed up. I had just bought some 1Z PP and MP but since it does contain oils and that might cause a bonding issue I guess I will have to buy the Menzerna Twins. Should have asked this before I ordered the 1Z. Oh well guess its live and learn.



Where do you guys buy your menzerna products at?

[imported_memnuts]

You can still use the 1Z polishes. Just Z7 wash or 50:50 isopropyl alcohol QD prior to applying the Zaino to remove the oils/silicones and fillers. Zero problems with Z adhersion.



Menzerna: CMA . They will Air-Freight overnight at NO charge to meet their promised shipping / delivery date!!!:xyxthumbs :xyxthumbs :xyxthumbs :xyxthumbs

[imported_Unreal]

So BLKZ28CONV you think I would be ok to use the 1Z stuff as long as I z7 wash prior to applying the Z2?

[imported_memnuts]

Perfectly OK :xyxthumbs



Zaino is not picky about what is used to prep a vehicle, only that oils and fillers do not predominating the surface after completing this step. Even after Menzerna I will wash vehicle. Normally polishing residue is everywhere and I like to rid vehicle of all such contaminates before I apply any protectant. :wavey

[imported_Unreal]

Thanks bud. I was worried I wasted 30 bucks on something that I wouldnt be able to use now.